MAD Components Components FS 2306 Thruster FPV Motor 1750KV-6S - Red

For optimal performance on 6S, pair this motor with 5-inch to 6-inch propellers, such as 5045, 5146, or 6040 tri-blades. The high KV rating provides excellent top-end speed, so avoid overly aggressive, high-pitch props on 6S to prevent excessive current draw and ESC overheating. Always bench-test with a current sensor to ensure your ESC and battery can handle the load.

Yes, the 4mm hardened steel shaft is the industry-standard size for FPV motors of this class. It is fully compatible with standard 4mm bore propellers and common propeller nuts or adapters. The included M5 lock nut provides a secure, vibration-resistant mount for your chosen propellers.

The 12N14P configuration offers a favorable balance of smoothness, torque, and efficiency. It reduces cogging torque for smoother low-RPM operation and better throttle resolution, which is beneficial for precise flying. This design also typically generates less electromagnetic interference (EMI), which can help maintain cleaner video transmission from your FPV camera.

While optimized for 6S, this 1750KV motor can operate on 4S or 5S LiPo batteries. On lower voltages, you will achieve lower maximum RPM and thrust, which may be suitable for lighter builds or less aggressive flying. Ensure your propeller choice matches the reduced voltage to avoid overloading the motor with an overly large prop in an attempt to compensate for lower RPM.