Generic HS-S50P Linear Hall Sensor Module - PH2.0 Interface, 3.3V/5V
Generic HS-S50P Linear Hall Sensor Module - PH2.0 Interface, 3.3V/5V - Image 2
SKU: SENS-2771
📋 GST Invoice Available

Generic HS-S50P Linear Hall Sensor Module - PH2.0 Interface, 3.3V/5V

₹109.00 (Inclusive of all taxes)
Out of Stock

The HS-S50P is a linear Hall effect sensor module providing an analog voltage output proportional to magnetic field strength. Operating on 3.3V or 5V DC, it is compatible with Arduino, Raspberry Pi, ESP32, and other microcontroller platforms via its PH2.0 connector for straightforward magnetic sensing applications.

Features

  • Linear analog output voltage directly proportional to magnetic field strength.
  • Dual-voltage operation compatible with 3.3V and 5V logic systems.
  • Compact PCB module with integrated Hall effect sensor IC.
  • Standard 3-pin PH2.0 connector for simplified wiring (GND, VCC, Signal).
  • Low power consumption suitable for portable and embedded designs.

Out of stock

Description

The HS-S50P Linear Hall Sensor Module utilizes a Hall effect integrated circuit to generate a continuous analog voltage signal based on the intensity and polarity of an applied magnetic field. This linear output allows for precise measurement and detection tasks beyond simple on/off switching.

The module includes onboard signal conditioning and is designed for easy integration into prototyping and embedded systems. Its three-wire interface provides ground, power supply, and the analog signal output, making it ready for connection to an ADC pin on most microcontrollers.

Key Features

  • Linear Hall Effect Sensing: Provides a continuous analog voltage output proportional to magnetic flux density.
  • Wide Voltage Compatibility: Stable operation from 3.3V to 5V DC, supporting a broad range of development boards.
  • Simplified Interfacing: Pre-wired PH2.0 3-pin connector eliminates the need for soldering during prototyping.
  • Compact Form Factor: Small PCB footprint (29mm x 16mm) allows for integration into space-constrained designs.
  • Low Quiescent Current: Optimized for energy-efficient operation in battery-powered applications.
  • Robust Signal Path: Onboard components provide stable output with minimal noise for reliable readings.

Applications

  • Non-contact linear position sensing in robotics and actuators.
  • Current sensing via magnetic field measurement around a conductor.
  • Magnetic field strength mapping and scientific instrumentation.
  • Proximity detection and tamper detection in security systems.
  • Speed measurement via detection of rotating magnetic elements.

Technical Specifications

ModelHS-S50P
Sensor TypeLinear Hall Effect
Operating Voltage3.3V to 5V DC
Output SignalAnalog Voltage
Interface3-pin PH2.0 Connector (G, V, S)
PinoutG: Ground, V: VCC (3.3-5V), S: Analog Signal Output
Module Dimensions (L x W)29 mm x 16 mm
Module WeightApprox. 3 g

Frequently Asked Questions

What is the output signal type of the HS-S50P sensor?

The HS-S50P provides a linear analog voltage output. The output voltage varies continuously and proportionally with the strength and polarity of the detected magnetic field, allowing for precise measurement rather than just a digital on/off state.

How do I connect the HS-S50P to an Arduino or similar microcontroller?

Connect the module's PH2.0 connector pins: 'V' to your board's 3.3V or 5V pin, 'G' to GND, and 'S' to any analog input pin (e.g., A0 on Arduino). The analog pin will read a voltage value corresponding to the magnetic field strength, which can be converted using the ADC.

Can this sensor detect both the strength and polarity of a magnet?

Yes, as a linear Hall effect sensor, the HS-S50P can detect both. The output voltage will increase or decrease from a mid-point quiescent voltage based on the magnetic field's strength and shift above or below that midpoint to indicate the polarity (North or South).

What is the purpose of the PH2.0 interface on this module?

The PH2.0 3-pin connector provides a quick-connect, solderless interface for prototyping. It standardizes connections to Jumper wires or compatible cables, simplifying wiring to breadboards and microcontroller shields while reducing the risk of incorrect hookups.

Package Includes

  • 1 x HS-S50P Linear Hall Sensor Module

Additional Information

Weight 0.003 kg
Dimensions 2.9 × 1.6 cm

Related Products

Image
Out of Stock

Upside Down Labs Muscle BioAmp Patchy v0.2 (Red) - Wearable EMG Sensor Module

1,709.00
Learn More
Image
Out of Stock

Upside Down Labs Muscle BioAmp BisCute DIY Kit - EMG Sensor Kit w/ Electrodes & Band

669.00
Learn More
Image
Out of Stock

Generic ECG AD8232 Heart ECG Monitoring Sensor Module

1,339.00
Learn More
Image
Out of Stock

SOP KTC-R-100 Linear Displacement Sensor, 100mm Stroke, 5KΩ Analog Output, Rod-Type Potentiometer

3,289.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0A710K0F 100–550cm Distance Sensor with Cable

419.00
Learn More
Image
Out of Stock

MIRAN LS2-50MM Linear Displacement Sensor - 0-50mm Range, Flange Mount, Hirschmann Plug

2,739.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0A41SK0F Analog Output Distance Measurement Sensor

899.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0A02YK0F Distance Measuring Sensor Unit 20 to 150 cm - Analog Output

591.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0A41SK0F 4–30 cm IR Distance Sensor with Cable

519.00
Learn More
Image
Out of Stock

Wittelb WIN-IO-4AOMV 4-Port Analog Output Voltage to Modbus RS485 Converter

6,424.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0E03 Distance Sensor, Analog + I²C Output, Range: 4–50 cm

609.00
Learn More
Image
Out of Stock

SOP KPZ-R-25mm Linear Displacement Sensor, 5KΩ Resistance, ≤28VDC, Miniature Push-Rod Type

2,989.00
Learn More