SKU: DRFC-1858
📋 GST Invoice Available

RadioLink F722 Flight Controller

₹4,169.00 (Inclusive of all taxes)
Out of Stock

The RadioLink F722 Flight Controller is a versatile STM32F722-based control unit designed for multi-rotor, fixed-wing, and surface vehicles, featuring an ICM42688 gyro, BMP280/DPS310 barometer, and native Betaflight firmware compatibility for 3-6S LiPo power systems.

Features

  • STM32F722RET6 processor for high-speed flight control and data processing.
  • Integrated ICM42688 gyroscope and BMP280/DPS310 barometer for precise attitude and altitude hold.
  • 128MB onboard black box storage for detailed flight log analysis and tuning.
  • Multi-vehicle support in Betaflight for drones, planes, helicopters, and rovers.
  • Robust power system with 5V/3A and 12V/3A BEC outputs for peripherals.

Out of stock

Description

The RadioLink F722 Flight Controller leverages the powerful STM32F722 microcontroller to deliver responsive and stable control for a wide range of RC applications. Its design integrates high-fidelity sensors, including the low-noise ICM42688 IMU and a precision barometer, providing a solid foundation for autonomous flight modes and smooth manual piloting.

Engineered for reliability, the board features a comprehensive suite of regulated BEC outputs to power FPV cameras, video transmitters, and receivers directly. The inclusion of a dedicated OSD chip (AT7456E) and a USB Type-C port ensures a clean, user-friendly setup and in-flight data overlay. Its compatibility with the Betaflight configurator simplifies PID tuning, rate adjustments, and firmware updates for pilots of all skill levels.

Key Features

  • High-Performance Core: STM32F722RET6 ARM Cortex-M7 processor enables advanced filtering and high loop rates.
  • Advanced Sensor Suite: Combines an ICM42688 gyro/accelerometer with a selectable BMP280 or DPS310 barometer for accurate flight data.
  • Extensive Black Box: 128MB of onboard flash memory allows for prolonged, high-resolution flight logging.
  • Versatile Power Management: Multiple BEC outputs (3.3V, 4.5V, 5V, 12V) support a wide array of peripherals without external regulators.
  • Robust Connectivity: USB Type-C interface and dedicated connection cables for ESCs, receivers (including ELRS), cameras, and VTX systems.
  • Broad Vehicle Support: Configured within Betaflight for multirotors, fixed-wing aircraft, helicopters, and surface vehicles.
  • Integrated On-Screen Display: AT7456E OSD chip provides crisp, customizable telemetry overlay directly from the flight controller.

Applications

  • 5-inch and 7-inch FPV racing and freestyle drones requiring a full-featured, Betaflight-compatible flight controller.
  • Fixed-wing and flying wing platforms utilizing Betaflight's airplane mode for stabilized flight.
  • Long-range exploration builds leveraging the barometer for altitude hold and the robust BEC for peripheral power.
  • Heavy-lift cinematic drones where stable control and multiple power outputs are critical for gimbals and FPV systems.
  • Surface vehicle and rover projects configured through Betaflight's ground vehicle modes.

Technical Specifications

ModelRadioLink F722
Main ProcessorSTM32F722RET6
GyroscopeICM42688
BarometerBMP280 / DPS310
Black Box Storage128MB
OSD ChipAT7456E
Firmware TargetRADIOLINKF722 (Betaflight)
USB InterfaceType C
Power Input3-6S LiPo (10.8V - 25.2V)
BEC Outputs3.3V/300mA, 4.5V/500mA, 5V/3A, 12V/3A
Weight9.5g

Frequently Asked Questions

What is the input voltage range for the RadioLink F722 flight controller?

The RadioLink F722 is designed for 3-6S LiPo battery inputs, corresponding to a voltage range of approximately 10.8V to 25.2V. Its integrated voltage regulator safely steps this down for the board's core logic and provides clean BEC outputs for peripherals.

Which Betaflight firmware target should I use for the RadioLink F722?

You must use the 'RADIOLINKF722' target when flashing or updating firmware in the Betaflight Configurator. This target is specifically configured for this board's pinout, sensor map, and feature set, ensuring all ports and functions operate correctly.

What sensors are integrated into the F722 flight controller?

The board features an ICM42688 gyroscope and accelerometer for primary attitude sensing. It also includes a barometric pressure sensor, which can be either a BMP280 or DPS310, providing data for altitude hold and variometer functions in supported flight modes.

Does the F722 have dedicated BEC outputs for peripherals?

Yes, it includes multiple switched BEC outputs: 3.3V at 300mA, 4.5V at 500mA, a robust 5V at 3A, and a 12V at 3A output. This allows you to power FPV cameras, VTXs, receivers, and LED systems directly without requiring separate voltage regulators.

Package Includes

  • 1 x RadioLink F722 Flight Controller
  • 1 x Camera Connect Cable
  • 2 x ESC Connect Cable
  • 1 x ELRS Receiver Connect Cable
  • 1 x Analog Video Transmission Connect Cable
  • 1 x TS100 Connect Cable
  • 1 x Receiver Connect Cable (3pin)
  • 1 x R8SM Receiver Connect Cable
  • 1 x User Manual

Additional Information

Weight 0.03 kg
Dimensions 8 × 8 × 2 cm