SKU: IOWC-1959
📋 GST Invoice Available

Teltonika OTD140 Outdoor 4G LTE Router Dual SIM PoE

₹17,569.00 (Inclusive of all taxes)
Out of Stock

The Teltonika OTD140 is an IP55-rated outdoor 4G LTE Cat 4 router, engineered for reliable industrial and remote IoT connectivity. It features dual SIM auto-failover, PoE in/out support, and operates from -40°C to +75°C for harsh environment deployments.

Features

  • Rugged outdoor IP55 enclosure with integrated pole/wall mount bracket for harsh environment deployment.
  • 4G LTE Cat 4 connectivity (150/50 Mbps) with fallback to 3G/2G and dual SIM auto-failover for maximum uptime.
  • Dual 10/100 Mbps Ethernet ports with 802.3af/at PoE input and 802.3af PoE output for simplified power and network cabling.
  • Low power consumption (<6W) with a wide 42.5–57 VDC input range, suitable for solar or industrial power systems.
  • Advanced VPN, firewall security, and RMS remote management support for secure, monitored industrial IoT networks.

Out of stock

Description

The Teltonika OTD140 is a purpose-built outdoor 4G LTE router designed to deliver robust, uninterrupted connectivity for industrial telemetry, remote monitoring, and critical IoT applications. Its hardened IP55 enclosure and extended operating temperature range from -40°C to +75°C ensure reliable performance in extreme environmental conditions, from solar farms to roadside cabinets.

Architected for network resilience, the router incorporates dual internal LTE antennas and intelligent dual SIM management with automatic failover, guaranteeing service continuity should one cellular network fail. The integrated Power over Ethernet (PoE) functionality simplifies installation by allowing the router to be powered via the Ethernet cable while also providing PoE output to power an additional device like a camera or sensor.

Key Features

  • IP55-rated rugged metal enclosure designed for outdoor and industrial environments.
  • 4G LTE Cat 4 modem supporting download speeds up to 150 Mbps and upload speeds up to 50 Mbps.
  • Dual SIM slots (2FF) with intelligent automatic failover for enhanced network reliability.
  • Integrated 802.3af/at PoE input and 802.3af PoE output on Ethernet ports.
  • Advanced security suite including VPN (IPsec, OpenVPN, WireGuard), Stateful Packet Inspection firewall, and access control lists.
  • Remote management and monitoring via Teltonika RMS (Remote Management System).
  • Wide operating voltage range (42.5–57 VDC) and low power consumption for off-grid applications.
  • Supports a comprehensive set of network protocols including MQTT, Modbus TCP, and SNMP for IoT integration.

Applications

  • Industrial IoT (IIoT) and SCADA remote telemetry for monitoring equipment status.
  • Outdoor CCTV and security camera systems requiring reliable backhaul connectivity.
  • Smart agriculture and environmental monitoring stations in remote fields.
  • Traffic management systems, digital signage, and roadside unit networks.
  • Utility grid monitoring for electricity, water, and oil/gas infrastructure.
  • Mobile command centers and temporary network deployments for events or construction.

Technical Specifications

Cellular Technology4G LTE Cat 4 / 3G / 2G
Maximum Data Speed150 Mbps Down / 50 Mbps Up
SIM SlotsDual SIM (2 × Mini SIM – 2FF)
Antenna Type2 × Internal LTE Antennas
Ethernet Ports2 × RJ45 (10/100 Mbps)
PoE SupportIn: IEEE 802.3af/at, Out: IEEE 802.3af
Input Voltage42.5–57 V DC
Power Consumption< 6 W (router only)
Operating Temperature-40°C to +75°C
Ingress ProtectionIP55
Dimensions (L×W×H)235 mm × 110 mm × N/A
Weight315 g

Frequently Asked Questions

How do I configure the dual SIM failover on the Teltonika OTD140?

Access the router's web interface via its default IP address. Navigate to the 'Mobile' or 'Cellular' settings section. Here, you can define primary and secondary SIM profiles and set the failover mode (e.g., 'Always on Primary' or 'Switch on Loss'). The router will automatically monitor the connection and switch to the secondary SIM if the primary network fails, ensuring continuous connectivity.

What is the correct power supply specification for the OTD140 router?

The Teltonika OTD140 requires a 42.5 to 57 VDC power source. It can be powered directly via the DC input terminal or, more conveniently, through Power over Ethernet using an 802.3af/at compliant PoE injector or switch connected to one of its Ethernet ports. Ensure your power source can provide the required voltage and at least 0.15A to cover the router's sub-6W consumption.

Can I use the OTD140's PoE output to power another device?

Yes, the OTD140 provides an 802.3af compliant PoE output on one of its Ethernet ports. This allows you to daisy-chain power to a secondary device, such as an IP camera or a sensor gateway, simplifying cabling in outdoor installations. Ensure the total power draw of the connected device does not exceed the available budget from the router's own power supply.

How do I remotely manage and monitor the OTD140 router?

For remote management, you can enable Teltonika's RMS (Remote Management System) service within the router's administration panel under the 'Services' section. Once configured, the router will establish a secure connection to the RMS cloud, allowing you to monitor status, update firmware, change configurations, and view connection logs from a centralized web dashboard from anywhere.

Package Includes

  • 1 x Teltonika OTD140 Outdoor 4G Router
  • 1 x Router Holder
  • 1 x Quick Start Guide

Additional Information

Weight 0.315 kg
Dimensions 23.5 × 11 cm