Holyiot 18010 nRF52840 BLE Module w/ Bluetooth 5, Zigbee & Thread
Holyiot 18010 nRF52840 BLE Module w/ Bluetooth 5, Zigbee & Thread - Image 2
SKU: IOWC-0093
📋 GST Invoice Available

Holyiot 18010 nRF52840 BLE Module w/ Bluetooth 5, Zigbee & Thread

₹1,129.00 (Inclusive of all taxes)
Out of Stock

The Holyiot 18010 is a multiprotocol wireless module based on the Nordic Semiconductor nRF52840 SoC, featuring a 64 MHz ARM Cortex-M4F processor, +8 dBm TX power, and support for Bluetooth 5, Bluetooth Mesh, Zigbee, Thread, and 802.15.4 for robust IoT and wearable designs.

Features

  • Powered by Nordic Semiconductor nRF52840 SoC with 64 MHz ARM Cortex-M4F processor, 1MB Flash, and 256KB RAM for complex application logic.
  • Multiprotocol wireless support for Bluetooth 5, Bluetooth Mesh, Zigbee, Thread, 802.15.4, ANT, and proprietary 2.4 GHz protocols.
  • Long-range capability with +8 dBm transmit power and -103 dBm receiver sensitivity for robust communication up to 300 meters.
  • Comprehensive peripheral set includes USB 2.0, QSPI, I2S, PDM, TWI, UART, ADC, and PWM for diverse sensor and interface needs.
  • Integrated ARM CryptoCell 310 provides hardware-accelerated AES-128/256, SHA, and ECC for secure IoT device authentication and data encryption.

Out of stock

Description

The Holyiot 18010 module integrates the high-performance nRF52840 system-on-chip, delivering a versatile wireless foundation for professional IoT deployments. Its ARM Cortex-M4F core with floating-point unit handles demanding tasks, while the integrated RF front-end supports extended range communication through configurable output power up to +8 dBm. The module’s advanced power management architecture enables ultra-low-power operation, critical for battery-powered edge nodes and wearables.

Engineered for secure and scalable networks, the module’s hardware cryptographic engine and support for major low-power wireless standards like Zigbee and Thread allow developers to build interoperable, mesh-capable systems. The inclusion of USB 2.0 and NFC-A interfaces simplifies device provisioning, firmware updates, and user interaction, making it suitable for consumer and industrial applications requiring reliable, long-range connectivity and robust security.

Key Features

  • High-performance 64 MHz ARM Cortex-M4F microcontroller with FPU for efficient signal processing and application workloads.
  • True multiprotocol radio supporting concurrent or switchable operation across Bluetooth 5, Mesh, Zigbee 3.0, Thread, and IEEE 802.15.4.
  • Enhanced RF performance with programmable output power up to +8 dBm and excellent -103 dBm receiver sensitivity for superior link budget.
  • Rich set of digital and analog interfaces: USB 2.0 full-speed controller, QSPI for external memory, I2S for digital audio, PDM for microphones, and multiple GPIOs.
  • Hardware-based security subsystem featuring ARM CryptoCell 310 with AES, SHA, ECC, and True Random Number Generator (TRNG).
  • Ultra-low-power design with multiple power domains and sleep modes, enabling years of operation on a coin cell battery.
  • Integrated NFC-A tag for touch-to-pair functionality, streamlining user onboarding for Bluetooth and other wireless protocols.
  • Compact 20mm x 30mm form factor with castellated edges for easy soldering and integration into custom PCB designs.

Applications

  • Smart home automation hubs and secure, mesh-networked sensors (door/window, motion, environment).
  • Professional wearables, fitness trackers, and advanced healthcare monitoring devices with audio capabilities.
  • Industrial wireless sensor networks (IIoT) for asset tracking, condition monitoring, and predictive maintenance.
  • Wireless controllers for gaming, VR/AR peripherals, and high-performance human interface devices (HID).
  • Smart lighting systems and building automation using Bluetooth Mesh or Zigbee protocols.
  • Prototyping and development of Thread-based border routers and Matter-compatible IoT products.

Technical Specifications

Microcontroller/SoCNordic Semiconductor nRF52840 (64 MHz ARM Cortex-M4F with FPU)
Wireless ProtocolsBluetooth 5, Bluetooth Mesh, Zigbee, Thread, 802.15.4, ANT, 2.4GHz proprietary
Frequency Range2402 - 2480 MHz
RF Transmit PowerUp to +8 dBm (programmable)
Receiver Sensitivity-103 dBm (BLE 1Mbps)
Supply Voltage1.7V - 5.5V DC
Memory1 MB Flash, 256 KB RAM
InterfacesUSB 2.0, QSPI/SPI, I2C (TWI), UART, I2S, PDM, PWM, ADC, GPIO
SecurityARM CryptoCell 310 (AES-128/256, SHA, ECC, TRNG)
Additional FeaturesNFC-A Tag, ARM TrustZone support
Operating Temperature-40°C to +85°C (typical for nRF52840)
Dimensions20 mm (W) x 30 mm (L)

Frequently Asked Questions

What development frameworks are supported for programming the Holyiot 18010 module?

The module is fully compatible with Nordic Semiconductor's nRF Connect SDK (Zephyr RTOS) and nRF5 SDK, which provide comprehensive support for Bluetooth, Zigbee, Thread, and 802.15.4 development. You can also use the Arduino Core for nRF52 or PlatformIO for a simplified workflow. Programming is typically done via the onboard SWD debug interface using a Segger or compatible debug probe, or via the USB CDC port for serial bootloader updates.

How do I enable the long-range +8 dBm transmit mode on this nRF52840 module?

Long-range mode is configured through software in the Nordic Semiconductor SDK or Zephyr. You need to set the TX power parameter using the `bt_le_adv_param` structure for Bluetooth advertising or the `nrf_radio_txpower_set` function for proprietary protocols. Ensure your power supply can deliver sufficient current during high-power transmission bursts. Antenna selection and matching are also critical; use a 50-ohm antenna connected via the onboard pad or connector for optimal performance at the maximum output power setting.

Can this module run Zigbee and Bluetooth concurrently?

The nRF52840 SoC supports dynamic multiprotocol functionality, allowing it to time-slice between Zigbee (or Thread) and Bluetooth Low Energy. This is managed by the Nordic Semiconductor SoftDevice or Zephyr's multiprotocol scheduler. You cannot transmit on both radios simultaneously, but they can coexist, with the radio switching protocols on a packet-by-packet basis. This enables use cases like a Zigbee sensor node that can also be commissioned and monitored via a BLE smartphone app.

What is the typical current consumption in different operating modes?

Current consumption varies significantly by mode. In active mode with radio RX, expect ~5-7 mA. During TX at 0 dBm, it's ~5-6 mA, and at +8 dBm, it can peak near 20 mA. Deep sleep mode (System ON) with RAM retention can draw as low as 2-4 µA. Using the built-in ARM CryptoCell for hardware encryption adds minimal overhead compared to software implementations, preserving battery life in security-intensive applications.

How do I connect an external antenna, and what type is recommended?

The module has an RF pad for a 50-ohm antenna. For best performance, solder a matched trace antenna directly to the pad or use a u.FL/IPEX connector if one is present on your specific variant. For the 2.4 GHz band, common antennas include ceramic chip antennas, PCB trace antennas, or external whip/dipole antennas with a 2-3 dBi gain. Ensure your antenna and feedline are impedance-matched to 50 ohms to prevent signal reflection and maximize the effective radiated power and receiver sensitivity.

Package Includes

  • 1 x Holyiot 18010 nRF52840 BLE Module

Additional Information

Weight 0.005 kg
Dimensions 3 × 2 cm

Related Products

Image
Out of Stock

Holyiot 18039 nRF52840 BLE 5.0 Module w/ Zigbee & Thread

1,459.00
Learn More
Image
Out of Stock

NXP Semiconductors FRDM-MCXW71 MCXW71X ARM Cortex-M33 Dev Board

4,509.00
Learn More
Image
Out of Stock

Espressif ESP32-C5-WROOM-1U-N8R8 Wi-Fi 6 & BLE Module

419.00
Learn More
Image
Out of Stock

Nordic Semiconductor NRF52840-DK Development Kit

7,519.00
Learn More
Image
Out of Stock

Waveshare ESP32-C6 Mini Wi-Fi 6 Development Board Type B, 5-36V Wide Voltage

769.00
Learn More
Image
Out of Stock

Reyax RYB5510 2.4GHz Bluetooth 5.4 Thread, Matter, Zigbee Module w/ Antenna

909.00
Learn More
Image
Out of Stock

Holyiot 21069 nRF5340 Ultra-Low Power Wireless Module

1,659.00
Learn More
Image
Out of Stock

Espressif ESP Thread BR-Zigbee GW Development Board

1,309.00
Learn More
Image
Out of Stock

AI-Thinker Ai-M61-32S-Kit Wi-Fi 6 + BLE5.3 Dev Board

449.00
Learn More
Image
Out of Stock

WeAct STM32WBA65 Core Board BLE5.3 Zigbee Thread

1,259.00
Learn More
Image
Out of Stock

M5Stack ESP32-H2 Thread/Zigbee Gateway Module

889.00
Learn More
Image
Out of Stock

IndieSemiC ISC-nRF52840-A BLE Module - Nordic Semiconductor nRF52840 Bluetooth 5.4, PCB Antenna

819.00
Learn More