Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller - Standard Set w/ MicroSD & Buzzer

The Pixhawk PIX 2.4.8 is primarily designed to run the open-source ArduPilot firmware, which can be configured and managed using the Mission Planner ground control station software. It is also compatible with the PX4 flight stack. The controller's 2 MB of flash memory and powerful STM32F427 processor provide ample resources for the full feature set of these advanced autopilot systems.

This flight controller supports up to 14 PWM or servo outputs, making it suitable for complex multirotor, fixed-wing, or robotic applications requiring control over multiple actuators, servos, or gimbals. The outputs are managed through the ArduPilot firmware, which allows for flexible channel assignment and mixing.

The controller has a nominal input voltage of 7V and features redundant power input connections with automatic failover. This design ensures that if one power source fails, the system can seamlessly switch to the backup, which is critical for maintaining flight stability and safety in professional UAV operations.

Yes, the controller's five UART serial ports allow you to connect multiple peripherals concurrently. Typically, one UART is dedicated to a GPS module (e.g., u-blox M8N), another to a telemetry radio (e.g., 3DR or Holybro), and others can be used for a companion computer, optical flow sensor, or additional serial devices as needed for your specific autonomous application.