Inskam C30-M 5M Single Lens Inspection Camera

The Inskam C30-M carries an IP67 rating, meaning it is dust-tight and can withstand immersion in up to 1 meter of water for up to 30 minutes. This makes it suitable for wet environments like plumbing inspections, but it is not designed for deep underwater or high-pressure jet washing applications. Always ensure the USB-C port cover is securely closed before exposure to liquids.

The camera records video and captures still images directly to a microSD (TF) card. Insert a formatted card into the TF card slot, power on the device, and use the onboard control buttons to start/stop recording or take photos. Footage is saved in 1080p resolution using efficient H.265 compression. Review files by connecting the microSD card to a computer or by using the camera's playback mode on its built-in screen.

The integrated 2000mAh lithium battery provides approximately 4 hours of continuous use with the screen on. Recharge the device using the included USB to Type-C cable connected to any standard 5V USB power source, such as a wall adapter, power bank, or computer port. A full charge typically takes 2-3 hours. The operating current is around 1A, so using a higher-current USB charger will not damage the device but will not charge it faster.

The 5-meter semi-rigid cable is permanently integrated into the camera housing and is not user-replaceable. Its IP67 rating is maintained through this sealed construction. For applications requiring longer reach, you must position the main unit closer to the inspection area. The cable is designed to be durable, but avoid sharp bends, kinks, or pulling it by the cable itself to prevent internal wire damage.