Slamtec LPX-E3 Industrial Field Monitoring Lidar Sensor (40m Range) - 9-30V DC, IP65

The LPX-E3 operates from a wide-range 9 to 30V DC power supply, making it compatible with standard industrial 12V or 24V DC systems. Typical power consumption is 3W, with an additional I/O output power of up to 1.2W. Ensure your power source can provide stable voltage within this range.

The detection zones are defined by object reflectivity and distance thresholds as per the sensor's firmware: Recognition (0.05-25m at 70% reflectivity), Warning (0.05-10m at ≥10% reflectivity), and Alarm (0.05-4m at ≥2% reflectivity). Configuration and output triggering for these zones are typically managed via the sensor's communication protocol through the provided SH1.0 connector interface.

This sensor provides a full 360° horizontal field of view with a 0.225° angular resolution, enabling high-density environmental mapping. It scans at a frequency of 20Hz, delivering real-time data for dynamic monitoring applications such as mobile robot navigation or perimeter security.

Yes, the LPX-E3 is built for industrial environments with an IP65 ingress protection rating. This rating certifies it is dust-tight and protected against water jets from any direction, allowing for reliable operation in many outdoor and factory floor conditions.

The sensor includes a pre-terminated 0.8-meter long cable with an SH1.0 12-pin male connector. This cable carries power, ground, and data communication lines for integration with your control system or host device.