Skydroid H12 Remote Control with Integrated Display - No Camera

The H12 is designed for seamless integration with ArduPilot and PX4-based flight controllers, including the Pixhawk series (Pixhawk 4, 5, 6), Pixhack, V5, V5 Nano, V5+, X7, X7 Pro, and Nora. It communicates via the included R12 receiver, which outputs standard PWM, PPM, or serial protocols to the flight controller.

The system utilizes advanced SDR and FHSS technology, with the manufacturer specifying a potential range of up to 30 kilometers under ideal, unobstructed conditions with clear line of sight. Actual operational range will be influenced by local RF interference, antenna placement, and output power regulations (e.g., CE 20dBm limit).

The H12 is charged via its USB Type-C port. Its integrated 10,000mAh high-capacity LiPo battery provides an endurance of approximately 6 to 20 hours depending on screen brightness, RF transmission power, and peripheral usage. A full charge cycle is required after extended storage to maintain battery health.

Yes, but it requires configuration. The included R12 receiver must be connected to your Betaflight flight controller via a compatible serial (SBUS, CRSF) or PWM input. You will then need to bind the R12 to the H12 transmitter and configure the corresponding protocol and channel map within Betaflight Configurator.