Whoop Lite F3 Mini Brushed Flight Controller
Whoop Lite F3 Mini Brushed Flight Controller - Image 2
Whoop Lite F3 Mini Brushed Flight Controller - Image 3
Whoop Lite F3 Mini Brushed Flight Controller - Image 4
Whoop Lite F3 Mini Brushed Flight Controller - Image 5
SKU: DRFC-2039
📋 GST Invoice Available

Whoop Lite F3 Mini Brushed Flight Controller

₹879.00 (Inclusive of all taxes)
Out of Stock

The Whoop Lite F3 Mini is a brushed flight controller designed for ultra-micro FPV whoop drones, featuring an STM32F030 CPU and MPU6050 gyro/accelerometer. It runs Silverware firmware and is fully compatible with Tiny Whoop and Blade Inductrix frames, supporting both level and acro flight modes via built-in Bayang protocol.

Features

  • STM32F030 CPU with MPU6050 six-axis gyro/accelerometer for precise flight control.
  • Runs Silverware firmware (BoldClash-BWHOOP-B-03) with support for level and acro flight modes.
  • Integrated 6A-rated FETs support 6x15mm to 8.5x20mm brushed motors.
  • 26x26mm mounting pattern compatible with Tiny Whoop and Blade Inductrix frames.
  • Built-in Bayang protocol receiver for compatibility with DeviationTX transmitters.

Out of stock

Description

The Whoop Lite F3 Mini Brushed Flight Controller is engineered for the ultra-micro whoop drone segment, providing a dedicated platform for Silverware firmware. Its compact 26x26mm footprint and integrated 6A FETs deliver reliable control for a range of small brushed motors, making it ideal for lightweight FPV racing and indoor flying.

Designed with a simple power input via a 55mm JST-PH 2.0 connector, the board emphasizes ease of integration. The on-board Bayang protocol receiver allows for direct binding with compatible radio systems, eliminating the need for an external receiver and simplifying wiring in constrained whoop frame builds.

Key Features

  • Compact 26x26mm form factor with a weight of just 2.5 grams for minimal impact on ultra-micro builds.
  • Integrated 6A MOSFETs provide robust power handling for 6x15mm, 7x20mm, 8x20mm, and 8.5x20mm brushed motors.
  • Pre-flashed with Silverware firmware (BoldClash-BWHOOP-B-03) offering tunable PID settings via stick gestures.
  • Direct compatibility with Tiny Whoop and Blade Inductrix frames using the standard mounting pattern.
  • Built-in Bayang protocol receiver simplifies the control link, requiring only a DeviationTX-compatible transmitter.
  • Includes vibration-damping mounting hardware (shock-absorbing balls) to reduce noise in flight data.

Applications

  • Ultra-micro Tiny Whoop FPV racers for indoor and tight-space flying.
  • Blade Inductrix-style brushed micro quadcopter builds and upgrades.
  • Lightweight Silverware firmware development and testing platforms.
  • Compact brushed motor drones requiring an integrated FC and receiver solution.

Technical Specifications

Item TypeFlight Controller
CPUSTM32F030
Six-Axis SensorMPU6050
FirmwareSilverware (BoldClash-BWHOOP-B-03)
Power Cable55mm with JST-PH 2.0 Connector
ESC/FET Rating6A Maximum
Supported Motors6x15mm, 7x20mm, 8x20mm, 8.5x20mm Brushed
Length26 mm
Width26 mm
Weight2.5 g
Mounting Pattern26x26mm
Receiver ProtocolBayang

Frequently Asked Questions

What firmware does the Whoop Lite F3 Mini Flight Controller use?

The controller is pre-flashed with Silverware firmware, specifically the BoldClash-BWHOOP-B-03 version. This firmware supports both level (angle) and acro flight modes, and PID settings can be adjusted via transmitter stick gestures without needing a computer.

What brushed motor sizes are compatible with this flight controller?

The integrated 6A-rated FETs support a range of small brushed motors, including 6x15mm, 7x20mm, 8x20mm, and 8.5x20mm sizes. This makes it suitable for most ultra-micro whoop builds based on Tiny Whoop or Blade Inductrix frames.

Which radio transmitters are compatible with the built-in receiver?

The board features a built-in Bayang protocol receiver. It is compatible with radio transmitters running DeviationTX firmware or with transmitter modules that support the Bayang protocol. It will not bind with standard FrSky, FlySky, or ExpressLRS systems without a protocol converter.

What is the mounting pattern and size of this flight controller?

The flight controller measures 26mm x 26mm and uses a standard 26x26mm mounting pattern, which is fully compatible with Tiny Whoop and Blade Inductrix frames. The package includes M1.2x4mm screws and shock-absorbing balls for vibration-damped installation.

Package Includes

  • 1 x WHOOP LITE flight controller
  • 4 x 2P x 1.25mm socket connectors
  • 1 x 2P x 2.0mm plug line
  • 4 x M1.2 x 4mm screws
  • 4 x shock-absorbing balls

Additional Information

Weight 0.0025 kg
Dimensions 2.6 × 2.6 cm

Related Products

Image
Out of Stock

ARF Quadcopter Kit w/ Pixhawk PX4, EMAX Motors, FlySky RC

35,019.00
Learn More
Image
Out of Stock

ARF Quadcopter Combo Kit w/ Q450, APM 2.8, FS-i6, 2212 920KV

23,369.00
Learn More
Image
Out of Stock

LilyGO T-Plus ESP32 Camera Module w/ 1.3-Inch IPS Display & OV2640

2,389.00
Learn More
Image
Out of Stock

Holybro Micro OSD V2 - Standard Set

2,689.00
Learn More
Image
Out of Stock

M5Stack Scroll Unit w/ Hollow Shaft Encoder & RGB LED (EC10E1220501)

609.00
Learn More
Image
Out of Stock

LiteWing ESP32 Programmable Drone Development Board

3,709.00
Learn More
Image
Out of Stock

Holybro Kakute H7 Mini V2 F7 Flight Controller

8,986.00
Learn More
Image
Out of Stock

SwiftCAN-HUB 6-Port Powered CAN Hub for ArduPilot, PX4, DroneCAN

5,547.00
Learn More
Image
Out of Stock

Generic Pixhawk LED Switch

439.00
Learn More
Image
Out of Stock

T-Motor DATA LINK V2 - Flight Controller Accessory

17,189.00
Learn More
Image
Out of Stock

Q100 Brushed Quadcopter DIY FPV Combo Kit w/ NAZE32 FC

3,149.00
Learn More
Image
Out of Stock

Pixhawk 2.4.8 Flight Controller Kit w/ GPS & Power Module

10,124.73
Learn More