SWYAM 2-Gang WiFi Smart Switch 16A Load

Most Wi-Fi smart switches of this type designed for the Indian and global market do require a neutral wire for the internal circuitry to operate, as they need continuous power for Wi-Fi connectivity. You should consult the specific installation manual provided with the unit or check with the supplier to confirm the exact wiring requirements for safe and proper installation in your electrical setup.

First, install the 'SWYAM Smart Home' app from your device's app store. Ensure your phone is connected to a 2.4GHz Wi-Fi network. Power the switch on, then follow the in-app setup wizard, which will guide you through putting the device into pairing mode (usually by holding a button). Select your home network from the app's list and enter the password. The app will then connect the switch to your Wi-Fi and your account for remote control.

Yes, once the SWYAM switch is successfully added to your SWYAM app account, you can link the SWYAM skill to your Amazon Alexa or Google Home app. The discovery process will typically identify the device as two separate entities (e.g., 'Switch 1' and 'Switch 2'). You can then rename them in your voice assistant app (e.g., 'Living Room Light' and 'Fan') and control each one independently using specific voice commands like 'Alexa, turn on Living Room Light'.

Inching mode, also known as momentary mode, configures the smart switch to turn a connected load on for a preset duration and then automatically turn it off. This is useful for applications like controlling a bathroom exhaust fan for 10 minutes after use or a porch light for 30 seconds. You typically enable and set the timer duration within the SWYAM Smart Home app's settings for the specific switch channel, allowing for automated, hands-free operation.