LWC-4G-MM-06 15m RG58 Coaxial Cable Assembly w/ Male Connectors

This cable assembly features standard male RF connectors on both ends. The specific thread type (e.g., SMA, N-Type) is not specified in the provided data, but it is designed for direct connection to female ports on 4G modems, routers, or antenna bases. Please verify the connector interface on your equipment for compatibility before purchase.

While primarily specified for 4G/LTE, GSM, and ISM bands, the cable's fundamental 50-ohm RG58 construction may support lower-frequency 5G bands. However, for optimal performance in high-frequency 5G mmWave applications, a lower-loss cable type like LMR® or Heliax is recommended due to RG58's higher attenuation over long distances at elevated frequencies.

The exact attenuation in dB per meter is not provided. RG58 cable typically has higher loss compared to lower-gauge cables like LMR-400. For a 15-meter run, expect measurable signal attenuation, especially at higher frequencies above 1 GHz. It is crucial to calculate your system's link budget, factoring in this cable loss, to ensure adequate signal strength at the antenna.

For outdoor installations, apply a layer of coax seal tape or rubber boot over the mated connector junction to prevent moisture ingress. Ensure the cable is not tightly bent below its minimum bend radius and is securely strain-relieved. Routing the cable through conduit provides additional physical protection from environmental elements and UV degradation.