eSUN W200 Water-Washable Resin - Clear, 1kg

Optimal printing settings for eSUN W200 resin typically include an exposure time of 2-3 seconds per layer for LCD printers and 6-10 seconds for bottom layers. Always perform an exposure calibration test (e.g., R_E_R_F) to fine-tune settings for your specific printer and desired layer height, ensuring crisp details and proper adhesion.

Prints from eSUN W200 resin should be rinsed thoroughly with clean tap water, using a soft brush if necessary to remove uncured surface resin. After drying completely, post-cure the part under a 395-405nm UV light for 2-5 minutes, ensuring all surfaces are exposed for optimal mechanical properties and durability.

eSUN W200 resin is designed for compatibility with most open-source LCD, SLA, and DLP 3D printers utilizing a 395-405nm UV light source. While broadly compatible, always check your printer's specifications and perform test prints to confirm optimal performance and adhesion with this specific water-washable formulation.

Store eSUN W200 resin in its original sealed bottle in a cool, dry, dark place, away from direct sunlight or UV light exposure. Maintaining a stable room temperature between 15-35°C (59-95°F) is ideal to prevent degradation and extend shelf life, ensuring consistent performance for future prints.