eSUN eResin-PLA Bio-Based Resin - Red, 1kg

Store eSUN eResin-PLA in a cool, dark place away from direct sunlight and heat, preferably in its original sealed bottle. Extreme temperatures can affect its shelf life and performance. Ensure the bottle cap is tightly closed to prevent air and moisture exposure, which can degrade the resin quality over time.

After printing, thoroughly clean the model with isopropyl alcohol (IPA) or ethanol, then air dry completely. Post-cure using a 395-405 nm UV light chamber. Curing times vary based on part thickness and UV intensity, typically 2-5 minutes per side, to achieve optimal mechanical properties and hardness.

Uncured resin and contaminated cleaning solutions should never be poured down the drain. Cure any residual resin in direct sunlight or a UV chamber until solid, then dispose of it as regular plastic waste. Dispose of IPA/ethanol according to local hazardous waste regulations.

While technically possible, it is generally not recommended to mix eSUN eResin-PLA with other resin types or brands. This can lead to unpredictable print results, compromised mechanical properties, and potential curing issues due to differences in chemical composition and UV reactivity. Stick to pure eResin-PLA for best performance.