eSUN W300 16K Water-Washable Resin, Black, 1kg

For optimal results with eSUN W300 16K Resin, start with a bottom exposure time of 25-35 seconds and normal exposure time of 2.0-3.5 seconds on 16K LCD printers. Layer height typically ranges from 0.02-0.05mm. Adjust exposure based on printer model and ambient temperature for best detail and layer adhesion.

After printing, rinse the model thoroughly with tap water to remove uncured resin; avoid using alcohol. Use a soft brush for intricate areas. Ensure models are completely dry before post-curing under a 395-405nm UV light for 2-5 minutes, ensuring all surfaces are exposed for optimal strength.

While not strictly required for odor control like some resins, maintaining a stable ambient temperature (20-30°C) is beneficial for consistent print quality with eSUN W300 resin. A well-ventilated space is always recommended when handling any photopolymer resin to minimize exposure to fumes.

The 16K precision level signifies the resin's compatibility with ultra-high-resolution LCD screens, allowing for significantly finer details and smoother surface finishes than lower-resolution resins. This is crucial for applications demanding intricate features, such as miniature models, jewelry, and precise dental components, minimizing visible layer lines.