eSUN W300 16K Water-Washable Resin Orange Red 1kg

Store the resin in a cool, dark place, away from direct sunlight and heat, within its original sealed bottle. Keep it at a temperature range of 15-35°C to prevent premature curing and maintain its viscosity. Ensure the cap is tightly sealed after each use to minimize exposure to air and moisture, preserving its performance for future prints.

After printing, clean parts thoroughly using tap water or a dedicated resin cleaning machine. Gently scrub or rinse until all uncured resin is removed from the surface and crevices. Avoid soaking parts for extended periods. Ensure the water is clean; multiple rinses might be necessary for complex models to achieve a perfectly clean surface ready for post-curing.

For optimal mechanical strength and hardness, post-cure the cleaned and dried prints under UV light. A 405nm UV curing station is recommended. The curing time typically ranges from 2-6 minutes, depending on the part's thickness and the intensity of the UV light source. Ensure all surfaces are exposed to the UV light for even curing.

While specifically optimized for 16K resolution printers to maximize detail, the eSUN W300 16K Water-Washable Resin is generally compatible with 8K and 12K LCD/DLP/SLA printers. You may need to adjust exposure times and other print settings slightly to achieve optimal results, as its formulation is geared towards higher precision light engines.