SKU: SENS-3100
📋 GST Invoice Available

DFRobot Gravity AS7341 11-Channel Visible Light Sensor - I2C Interface

₹2,309.00 (Inclusive of all taxes)
Out of Stock

The DFRobot Gravity AS7341 is an 11-channel spectral sensor module compatible with 3.3V/5V systems like Arduino, Raspberry Pi, and ESP32. It provides high-resolution color analysis across eight visible light bands, plus near-IR and flicker detection channels for precise lighting and colorimetric applications.

Features

  • 11-channel spectral sensing: 8 visible light bands, 1 near-IR channel, 1 clear channel.
  • Integrated 50Hz/60Hz ambient light flicker detection for stable lighting control.
  • Six independent 16-bit ADC channels for parallel, high-precision data acquisition.
  • Onboard high-brightness LEDs for illumination in low-light conditions.
  • Gravity-series connector for plug-and-play compatibility with DFRobot ecosystem and standard I2C interface.

Out of stock

Description

The DFRobot Gravity AS7341 Visible Light Sensor employs the advanced AS7341 spectral sensor IC from ams OSRAM AG. It utilizes a configurable array of optical filters to dissect incoming light into eight specific wavelength bands across the visible spectrum (405–690nm), alongside dedicated channels for near-infrared and unfiltered light measurement. This enables precise spectral analysis far beyond simple RGB sensing.

The module integrates six independent 16-bit analog-to-digital converters, allowing simultaneous sampling for high-speed, accurate color data capture. An integrated flicker detection engine identifies 50Hz or 60Hz artificial lighting interference, critical for stable readings in indoor environments. Two onboard high-current LEDs provide supplemental illumination, ensuring reliable sensor operation in dark or controlled lighting setups.

Key Features

  • High-resolution spectral analysis with eight dedicated visible light channels (F1-F8).
  • Integrated ambient light flicker detection (50Hz/60Hz) for robust operation under artificial lighting.
  • Parallel data processing via six independent 16-bit ADC channels for high-speed sampling.
  • Onboard high-brightness LEDs with programmable drive current (4–42mA) for controlled illumination.
  • Wide operating voltage range (3.3V to 5V) for compatibility with most microcontrollers and SBCs.
  • Compact Gravity-series form factor with standardized I2C interface for easy system integration.
  • Extended operating temperature range (-30°C to +85°C) for reliable performance in varied environments.

Applications

  • Precise color matching and quality control in printing, textile, and paint industries.
  • Smart lighting systems for automated color temperature and ambient atmosphere adjustment.
  • Spectral analysis for plant health monitoring and optimized growth conditions in horticulture.
  • Material identification and sorting based on spectral signature in automated systems.
  • Art restoration and archival work requiring accurate color measurement and analysis.

Technical Specifications

ManufacturerDFRobot
Sensor ICAS7341 (ams OSRAM AG)
Operating Voltage3.3V to 5V DC
InterfaceI2C
I2C Address0x39
Visible Light Channels8 channels (405-425nm, 435-455nm, 470-490nm, 505-525nm, 545-565nm, 580-600nm, 620-640nm, 670-690nm)
Additional Channels1 Near-IR channel, 1 Clear channel, 1 Flicker detection channel
ADC Resolution16-bit (6 independent channels)
LED Drive Current4 mA to 42 mA (programmable)
Quiescent Current (LEDs off)< 5 mA
Operating Temperature-30°C to +85°C
Operating Humidity5% RH to 85% RH
Module Dimensions (L x W)22 mm x 20 mm

Frequently Asked Questions

What is the I2C address of the DFRobot AS7341 sensor module?

The default I2C address for the DFRobot Gravity AS7341 module is 0x39 (hexadecimal). This address is fixed for this specific Gravity-series board. Ensure your microcontroller code uses this address when initializing communication with the sensor over the I2C bus.

Can this sensor operate with both 3.3V and 5V logic systems?

Yes, the module is designed for a wide operating voltage range of 3.3V to 5V DC. This makes it directly compatible with 5V Arduino boards (Uno, Mega) and 3.3V platforms like Raspberry Pi, ESP32, and STM32 without requiring a logic level shifter. The I2C communication lines are also tolerant of both voltage levels.

How do the onboard LEDs function, and can I control their brightness?

The module features two high-brightness white LEDs for illumination. Their drive current is programmable via the AS7341 IC's internal registers, adjustable from approximately 4mA to 42mA across 20 steps. This allows you to tailor the illumination intensity to your application, from subtle fill-light to full brightness for dark environments, all controlled through I2C commands.

What is the purpose of the flicker detection channel?

The dedicated flicker detection channel identifies the frequency (50Hz or 60Hz) of ambient artificial light sources, such as fluorescent or LED lamps powered by AC mains. Detecting this flicker allows the sensor or your host system to synchronize measurements or compensate for the periodic light variation, ensuring stable and accurate spectral readings in indoor environments.

Package Includes

  • 1 x DFRobot Gravity AS7341 11-Channel Visible Light Sensor Module

Additional Information

Weight 0.02 kg
Dimensions 2.2 × 2 cm