TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable
TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable - Image 2
TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable - Image 3
SKU: SENS-1556
📋 GST Invoice Available

TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable

₹8,479.00 (Inclusive of all taxes)
Out of Stock

The TE Connectivity FX293X-040B-0050-L is a precision compression-type load cell sensor with a 50 lb (22.8 kg) capacity, designed for integration into industrial automation, robotics, and weight monitoring systems requiring a compact footprint and reliable 4-wire connection.

Features

  • Compression-type load cell with a 50 lb (22.8 kg) full-scale capacity.
  • Operates with an excitation voltage up to 5.25V DC, compatible with standard logic levels.
  • Compact 20mm x 20mm footprint with a 40mm 4-wire ribbon cable for tight-space integration.
  • Wide operating temperature range from 0°C to 50°C for stable performance.
  • Robust construction with an extended storage temperature range of -40°C to +85°C.

Out of stock

Description

The FX293X-040B-0050-L load cell from TE Connectivity utilizes a precision strain gauge bridge configuration to provide accurate force measurement in compression. Its compact, monolithic design ensures high stiffness and minimal deflection under load, delivering a stable mV/V output signal proportional to the applied force.

Engineered for demanding environments, the sensor features a wide operating temperature range and is protected against electrostatic discharge (ESD) up to ±4.0 kV. The integrated 4-wire ribbon cable with connector simplifies wiring and system integration, making it a reliable choice for embedded force sensing applications.

Key Features

  • High-precision compression load cell from the trusted TE Connectivity FX29 series.
  • Strain gauge-based sensing principle for accurate and repeatable force measurement.
  • Compact 20mm x 20mm form factor with a minimal 6g weight for space-constrained designs.
  • 4-wire (Kelvin) connection via ribbon cable enables precise resistance measurement and compensation for lead wire effects.
  • Robust performance across a 0°C to 50°C operating range with extended storage capabilities.
  • ESD protection rated from -4.0 kV to +4.0 kV enhances reliability in industrial settings.
  • Low operating current (3 mA typical) for energy-efficient system integration.

Applications

  • Precision force measurement in robotic grippers and end-effectors.
  • Industrial automation for process control and overload detection.
  • Embedded weight monitoring in compact scales and dispensing systems.
  • Force feedback and control in medical devices and rehabilitation equipment.
  • Structural load monitoring in test fixtures and laboratory setups.

Technical Specifications

Manufacturer Part NumberFX293X-040B-0050-L
Sensor TypeCompression Load Cell
Full-Scale Load Capacity50 lb (22.68 kg)
Maximum Excitation Voltage5.25 V
Operating Temperature Range0°C to 50°C
Storage Temperature Range-40°C to +85°C
ESD Protection-4.0 kV to +4.0 kV
Typical Operating Current3 mA
Connection Type4-Wire Ribbon Cable with Connector
Cable Length40 mm
Sensor Dimensions (L x W)20 mm x 20 mm
Sensor Weight6 g

Frequently Asked Questions

What is the excitation voltage requirement for this FX293X load cell?

The FX293X-040B-0050-L load cell can be operated with an excitation voltage up to 5.25V DC. It is designed to be compatible with common 5V microcontroller and data acquisition systems. Always refer to the specific amplifier or signal conditioner datasheet for the recommended drive voltage to ensure optimal performance and avoid exceeding the sensor's maximum rating.

How do I connect the 4-wire ribbon cable from the load cell?

The integrated 4-wire ribbon cable uses a Kelvin (4-wire) connection scheme. This configuration uses two wires for exciting the strain gauge bridge (Excitation+ and Excitation-) and two separate wires for sensing the output signal (Signal+ and Signal-). This method compensates for lead wire resistance, providing more accurate measurements. The cable terminates in a specific connector; mating connector details are available in the TE Connectivity datasheet.

What is the output signal format of this compression load cell?

This is a resistive strain gauge-based load cell. It provides a millivolt-per-volt (mV/V) ratiometric output signal. The actual output voltage is proportional to both the applied load and the excitation voltage supplied to the sensor. A dedicated instrumentation amplifier or load cell amplifier module is required to condition this small differential signal into a usable voltage for microcontrollers or PLCs.

Can this sensor be used for both compression and tension measurements?

No, the FX293X-040B-0050-L is specifically designed as a compression-only load cell. Its mechanical structure is optimized to measure forces applied in one direction, pressing down on the sensing element. Applying tensile (pulling) forces may damage the sensor and will not provide accurate readings. Always ensure the force is applied in the correct orientation as specified in the mechanical drawings.

Package Includes

  • 1 x TE Connectivity FX293X-040B-0050-L Load Cell Sensor

Additional Information

Weight 0.006 kg
Dimensions 2 × 2 cm

Related Products

Image
Out of Stock

Amphenol Wilcoxon LVEP050-TO5 Accelerometer Sensor, Ultra Low Power, 17kHz, 0.05V/g, 3-5.5VDC, TO5 Through Hole

22,039.00
Learn More
Image
Out of Stock

YZC-133 5kg Load Cell Sensor with Wires 80 x 12 x 12mm

120.00
Learn More
Image
Out of Stock

SOP SOPMH-103 50kg Load Cell Sensor - 1.4mV/V, 0.3% F.S Accuracy

5,299.00
Learn More
Image
Out of Stock

TE Connectivity FC2311-0000-1000-L Load Cell, 1000 lbf Compression, 10V Excitation, 2ft Cable

14,589.00
Learn More
Image
Out of Stock

SOP SOP601-5kg Single Point Load Cell Sensor, 2.0mV/V, ±0.02%, IP65, Aluminum Alloy

2,669.00
Learn More
Image
Out of Stock

TE Connectivity FX29K0-040B-0050-L Compression Load Cell Sensor, 50lb (22.68kg) Capacity, 5.5V, 4-Wire Ribbon Cable

6,529.00
Learn More
Image
Out of Stock

TE Connectivity FC2231-0000-0050-L Load Cell – Mid Range Compression, 50 lb, 5V, 0.5-4.5V Output

14,879.00
Learn More
Image
Out of Stock

SOP SOP601-10kg Single Point Load Cell Sensor, 2.0mV/V, 0.02% Precision

2,669.00
Learn More
Image
Out of Stock

SOP SOPLY-104 500kg Load Cell Sensor with Feet - 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable

4,509.00
Learn More
Image
Out of Stock

Amphenol Wilcoxon HV200 High EMI Resistance Accelerometer Sensor, 100 mV/g, ±80 g, Analog, 18-30 VDC

68,939.00
Learn More
Image
Out of Stock

7Semi HX711 Load Cell Amplifier Module - 24-bit ADC for Weigh Scales

104.00
Learn More
Image
Out of Stock

Pro-Range GSP903 10 kN Rope Tension Load Cell Sensor, 0.3%F.S, 1.0-1.5mV/V, 10VDC

11,319.00
Learn More