SKU: DRFC-3348
📋 GST Invoice Available

HOTRC DS-600 6CH 2.4GHz FHSS Radio System Transmitter Remote Controller GFSK 6CH Receiver PWM

₹2,999.00 (Inclusive of all taxes)
Out of Stock

The HOTRC DS-600 is a 6-channel 2.4GHz FHSS pistol-grip radio system designed for DIY RC projects, featuring GFSK modulation, a 400-600m ground range, and compatibility with standard PWM servos and ESCs.

Features

  • 6-channel 2.4GHz FHSS radio system with GFSK modulation for stable, interference-resistant control.
  • Pistol-grip transmitter design with ergonomic contours for comfortable, extended operation.
  • Delivers a control range of 400-600m on the ground and 300-500m over water surfaces.
  • Supports standard PWM output for direct compatibility with servos, ESCs, and flight controllers.
  • Wide input voltage range (DC 4V-14V) for flexible powering from various battery packs.

Out of stock

Description

The HOTRC DS-600 radio system provides a reliable control link for a wide range of DIY multirotor, rover, and boat projects. Its Frequency Hopping Spread Spectrum (FHSS) protocol on the 2.4GHz band ensures robust signal integrity in environments with multiple transmitters, while the integrated 6-channel PWM receiver offers straightforward connectivity to standard RC components.

Built around a lightweight, ergonomic pistol-grip transmitter, the system prioritizes user comfort and intuitive operation. The receiver features high receive sensitivity (<-97dBm) and low transmit power (<100mW), making it a practical choice for entry-level and intermediate builders seeking a dependable control solution without complex setup procedures.

Key Features

  • FHSS 2.4GHz System: Employs Frequency Hopping Spread Spectrum technology for enhanced resistance to signal interference and crosstalk.
  • 6-Channel PWM Receiver: Provides six independent control channels with a fast response time (≤20ms) for precise command of servos, ESCs, and auxiliary functions.
  • Extended Operational Range: Achieves a reliable control distance of 400-600 meters on open ground, suitable for FPV and line-of-sight applications.
  • Ergonomic Pistol-Grip Design: Transmitter body is shaped for a secure, comfortable grip, reducing hand fatigue during prolonged use.
  • Wide Voltage Compatibility: Receiver operates on a broad DC 4V-14V input, supporting power from 1S to 3S LiPo batteries or regulated BEC outputs.
  • Lightweight Construction: Complete system weighs approximately 70g, minimizing added mass to lightweight drone or rover builds.

Applications

  • Entry-level and DIY FPV drone builds requiring a simple, reliable 6-channel control link.
  • RC ground vehicles, crawlers, and tracked platforms utilizing PWM servo control for steering and accessories.
  • Small-scale RC boat and aquatic vehicle projects where water-surface range is a key consideration.
  • Educational and maker projects integrating radio control for robotics, pan/tilt cameras, or payload mechanisms.
  • Backup or secondary radio system for bench testing servos, ESCs, and flight controller outputs.

Technical Specifications

BrandHOTRC
ModelDS-600
Channels6
Frequency Band2.4GHz ISM (2.4005-2.4835GHz)
ModulationGFSK
Spread Spectrum MethodFHSS
Control Range (Ground)400-600m
Control Range (Water)300-500m
Receiver Sensitivity< -97dBm
Transmit Power< 100mW
Receiver OutputPWM
Response Speed≤ 20ms
Input VoltageDC 4V - 14V
Transmitter WeightApprox. 70g

Frequently Asked Questions

What is the maximum control range of the HOTRC DS-600 system?

The HOTRC DS-600 provides a reliable control range of approximately 400-600 meters in open ground conditions and 300-500 meters over calm water surfaces. Actual range can be affected by environmental interference, antenna orientation, and obstacles.

What type of batteries can power the DS-600 receiver?

The receiver has a wide input voltage range of DC 4V to 14V. This makes it compatible with a 1S LiPo (3.7V nominal), a 2S LiPo (7.4V nominal), a 3S LiPo (11.1V nominal), or any regulated 5V BEC output from an ESC or flight controller.

Is the DS-600 receiver compatible with standard flight controllers and servos?

Yes. The receiver outputs standard PWM signals on all six channels, which are directly compatible with the PWM/SBUS input pins on most flight controllers (for channel mapping) and with standard analog servos and ESCs that accept PWM input.

What does FHSS mean, and why is it beneficial?

FHSS stands for Frequency Hopping Spread Spectrum. It is a transmission method where the radio signal rapidly switches (hops) across multiple channels within the 2.4GHz band. This provides increased resistance to interference and signal blocking from other 2.4GHz devices like Wi-Fi routers, resulting in a more stable and reliable control link.

Package Includes

  • 1 x HOTRC DS-600 6CH Pistol-Grip Transmitter
  • 1 x 6CH 2.4GHz PWM Receiver

Additional Information

Weight 0.125 kg
Dimensions 7 × 15 × 5 cm