CAELUS FA2810 1100KV Brushless Motor

The FA2810 1100KV motor is optimized for 7-inch to 8-inch propellers on 6S voltage. Manufacturer testing was performed with a GF7043-3R propeller, achieving 2465g of thrust. For best performance and efficiency in long-range or heavy-lift applications, select propellers within this size range that match your desired flight characteristics.

A 40A to 60A ESC is recommended per motor. For a 4-in-1 ESC configuration, ensure the total current rating meets or exceeds the combined demand of all four motors. Using an ESC with BLHeli_S or BLHeli_32 firmware that supports 6S input and DShot protocol will ensure full compatibility and responsive throttle control.

The motor features a standard Ø19mm Pitch Circle Diameter (PCD) mounting pattern with four M3 threaded holes. This is a common pattern compatible with many 7-inch and 8-inch drone frames designed for larger motors. Ensure your frame's motor mounting plate has corresponding M3 clearance holes spaced 19mm apart.

Yes, the FA2810's 12N14P design with 52H magnets provides high torque for rapid acceleration and strong braking, which is beneficial for freestyle maneuvers. Its robust CNC aluminum construction and high-temperature windings can handle the peak power demands of aggressive flying. However, its 1100KV rating and larger physical size make it best suited for larger 7-inch or 8-inch freestyle quads rather than smaller, lighter builds.