SKU: DRFC-0032
📋 GST Invoice Available

AxisFlying Argus PRO 65A 3-6S FPV ESC

₹15,109.00 (Inclusive of all taxes)
Out of Stock

The AxisFlying Argus PRO 65A ESC delivers robust power control for high-performance FPV drones, supporting 3-6S LiPo input with a continuous 65A current. Featuring an IP54-rated dust and splash-resistant design, this plug-and-play ESC simplifies builds by eliminating soldering for core connections.

Features

  • Delivers a continuous 65A current, perfect for high-power 3-6S FPV racing and freestyle drone builds.
  • Features IP54 dust and splash protection, enhancing durability in challenging outdoor flight conditions.
  • Equipped with integrated dual BEC outputs (9V@2A, 5V@2A) to power peripherals like DJI O3 Air Units directly.
  • Offers a plug-and-play design that minimizes soldering, simplifying complex drone assembly and maintenance.

Out of stock

Description

The AxisFlying Argus PRO 65A Electronic Speed Controller is engineered for the rigorous demands of modern FPV drone applications, offering exceptional performance and reliability. As a key component of the Argus PRO series, this ESC integrates advanced 32-bit architecture with robust construction, ensuring precise motor control and stable operation across a wide range of flight conditions.

Designed with practicality in mind, the Argus PRO 65A features an intelligent thermal management system and high-quality MOSFETs, delivering a continuous 65A current with minimal heat generation. Its wide 3-6S LiPo input voltage compatibility caters to both agile freestyle setups and powerful racing configurations. The innovative plug-and-play design significantly simplifies installation, allowing direct connection to various peripherals without the need for intricate soldering.

Beyond its core propulsion capabilities, this ESC enhances flight system integration with an IP54 dust and splash-resistant enclosure, protecting vital electronics. It also incorporates a dual BEC (9V@2A, 5V@2A) to efficiently power additional components such as HD FPV systems like the DJI O3 Air Unit, alongside comprehensive status indicator lights for straightforward diagnostic checks during setup and operation.

Key Features

  • IP54-rated enclosure provides robust protection against dust and splashes, ensuring reliable operation in diverse environments.
  • Utilizes high-quality MOSFETs with low internal resistance for superior power delivery and enhanced efficiency under continuous high current loads.
  • Features a convenient plug-and-play design, enabling direct, solder-free connection to flight controllers and other critical peripherals.
  • Integrated dual BEC outputs (9V@2A and 5V@2A) offer dedicated power supply for components like the DJI O3 Air Unit and other sensitive electronics.
  • Supports up to 8 individual motor outputs, providing compatibility for advanced X8 drone configurations requiring precise independent motor control.
  • Equipped with clear status indicator lights, allowing for quick visual checks of the ESC's operational status and diagnostic feedback.
  • Wide 3-6S LiPo input voltage range ensures versatility for various drone builds, from lightweight racers to powerful freestyle quads.
  • Advanced 32-bit processor architecture provides rapid signal processing and precise motor control algorithms.

Applications

  • High-performance FPV racing drones requiring precise throttle response.
  • Freestyle FPV quads demanding robust power delivery and durability.
  • Cinematic and professional camera drones needing stable motor control for smooth footage.
  • X8 coaxial setups for increased thrust and redundancy in specialized applications.
  • Long-range FPV platforms where reliability and efficient power management are crucial.

Technical Specifications

ModelArgus PRO ESC
Continuous Current65A
Input Voltage3-6S LiPo (11.1V - 22.2V)
Mounting Pattern30.5 x 30.5 mm (M3 holes)
BEC Output9V @ 2A, 5V @ 2A
PWM Frequency16-96 KHz
Protection RatingIP54 (Dust & Splash Resistant)
FirmwareBLHeli_32

Frequently Asked Questions

What flight controller firmware is compatible with the AxisFlying Argus PRO 65A ESC?

The Argus PRO 65A ESC is compatible with standard 32-bit ESC firmware, typically BLHeli_32. This allows for extensive configuration via BLHeliSuite32, including motor timing, RPM filtering, and current limiting. Ensure your flight controller runs Betaflight, ArduPilot, or a compatible firmware that supports DShot protocols for optimal performance.

Can this ESC directly power a DJI O3 Air Unit or other digital FPV systems?

Yes, the AxisFlying Argus PRO 65A ESC features an integrated dual BEC system. It provides a dedicated 9V at 2A output, specifically designed to power high-draw digital FPV air units like the DJI O3 without needing external voltage regulators. There is also a 5V at 2A output for other peripherals.

What are the main benefits of the IP54 protection on this ESC?

The IP54 rating signifies that the AxisFlying Argus PRO 65A ESC is protected against dust ingress sufficient to prevent damage and against splashes of water from any direction. This enhances the ESC's durability and reliability when flying in adverse weather conditions, such as light rain or over dusty terrain, extending its operational lifespan.

What mounting pattern does the AxisFlying Argus PRO 65A ESC use, and how is it connected?

This ESC features a standard 30.5 x 30.5 mm mounting pattern with M3 holes, making it compatible with most modern FPV drone frames. Its plug-and-play design simplifies connection to the flight controller, minimizing the need for soldering for main signal wires, which significantly speeds up assembly and maintenance for builders.

Package Includes

  • 1x AxisFlying Argus PRO 65A 3-6S ESC
  • 1x To Flight Controller Cable
  • 1x Rubber Ring for Mounting
  • 1x XT60 Power Cord
  • 1x Rubycon 35V 470μF Capacitor
  • 1x SH1.0 8-Pin Plastic Case (for FC Line)

Additional Information

Weight 0.07 kg
Dimensions 7 × 7 × 7 cm