WT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth
WT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth - Image 2
WT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth - Image 3
SKU: IOWC-1823
📋 GST Invoice Available

WT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth

₹1,719.00 (Inclusive of all taxes)
Out of Stock

The WT32-ETH01 is an embedded serial-to-Ethernet gateway module based on the ESP32, integrating Wi-Fi, Bluetooth, and a TCP/IP stack for rapid IoT device networking and remote data acquisition.

Features

  • ESP32-based core delivers dual-core processing, 4MB RAM, and integrated 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 (BR/EDR & BLE).
  • Dual-mode serial-to-Ethernet gateway enables reliable wired network connectivity for legacy serial devices (RS232/RS485).
  • Supports 3.3V and 5V input voltages with a wide operating temperature range (-40°C to +85°C) for industrial environments.
  • Integrated TCP/IP protocol stack simplifies development, supporting IPv4, TCP/UDP, and hardware-accelerated encryption (AES/RSA/ECC/SHA).
  • Compact, through-hole design allows for direct PCB soldering or use with semi-welding disks for flexible integration.

Out of stock

Description

The WT32-ETH01 Serial to Ethernet Gateway Module is a robust networking solution built around the Espressif ESP32 chipset. It functions as a bridge, converting serial data from industrial sensors, controllers, or legacy equipment into Ethernet packets for seamless integration into modern IP-based networks. The module’s integrated Wi-Fi and Bluetooth provide additional wireless connectivity options, enabling hybrid wired/wireless deployment scenarios.

Engineered for reliability, it operates across an extended industrial temperature range and features a hardened TCP/IP stack with support for essential security protocols. Its compact form factor and flexible mounting options make it suitable for embedding directly into end-user products or industrial control panels, significantly reducing development time for IoT system integrators and hardware developers.

Key Features

  • ESP32 dual-core processor with integrated 2.4GHz Wi-Fi and Bluetooth 4.2 for versatile connectivity.
  • Serial port to Ethernet conversion gateway for connecting legacy industrial equipment to modern networks.
  • Dual power supply compatibility (3.3V & 5V) simplifies integration into existing systems.
  • Hardware-accelerated cryptographic engine supports AES, RSA, ECC, and SHA for secure communications.
  • Industrial-grade operating temperature range from -40°C to +85°C ensures reliability in harsh conditions.
  • Compact, through-hole PCB design allows for direct soldering or use with connector interfaces.
  • Integrated TCP/IP protocol stack (IPv4, TCP/UDP) reduces firmware development complexity.
  • Compliant with FCC, CE, and RoHS certifications for global market deployment.

Applications

  • Industrial IoT (IIoT) gateways for PLCs, sensors, and meters with serial outputs (RS232/RS485).
  • Smart home automation hubs bridging legacy HVAC, security, or lighting controllers to Wi-Fi/Ethernet networks.
  • Remote telemetry and data acquisition systems for environmental monitoring and equipment diagnostics.
  • Network-enabled control panels and human-machine interfaces (HMIs) for building management.
  • Prototyping and development of custom IoT gateways requiring both wired and wireless backhaul.

Technical Specifications

Microcontroller/SoCESP32 (Dual-core)
Wireless ProtocolsWi-Fi 802.11 b/g/n, Bluetooth 4.2 BR/EDR & BLE
Primary FunctionSerial to Ethernet Gateway
Supply Voltage3.3V, 5V
RAM4 MB
Clock Frequency2.4 GHz (Processor)
Operating Temperature-40°C to +85°C
Symbol Rate80 - 5,000,000 bps
SecurityAES, RSA, ECC, SHA
Network ProtocolsIPv4, TCP, UDP

Frequently Asked Questions

How do I configure the WT32-ETH01 for serial-to-Ethernet conversion?

Configuration is typically done via AT commands over a UART serial connection. Connect the module's TX/RX pins to a USB-to-serial adapter, power it with 3.3V or 5V, and use a terminal emulator (e.g., PuTTY) at a common baud rate like 115200. Issue commands to set the module's operation mode (TCP Server/Client, UDP), local IP address, target server IP/port, and serial baud rate to match your connected device. The exact command set should be referenced from the manufacturer's documentation.

Can I program the ESP32 on the WT32-ETH01 using the Arduino IDE?

Yes, the onboard ESP32 can be programmed via the Arduino IDE, ESP-IDF, or MicroPython. You will need to access the module's programming pins (typically GPIO0 and EN/RST) to enter bootloader mode. Connect a USB-to-serial programmer to the main UART pins (TX/RX) and ground. Hold GPIO0 low while powering on or toggling the EN pin to enter download mode, then upload your sketch. Note that programming may override the factory AT firmware, so back it up if needed.

What is the power consumption and sleep current of the WT32-ETH01 module?

While specific sleep currents aren't provided, the ESP32 chipset supports deep sleep modes which can reduce current to microamps. Active current draw depends on Wi-Fi/Ethernet activity and CPU load. For power-sensitive applications, utilize the ESP32's deep sleep functions via GPIO or timer wake-ups in your firmware. Ensure your 3.3V or 5V power supply can deliver sufficient current (likely several hundred milliamps) during RF transmission and peak processing.

Package Includes

  • 1 x WT32-ETH01 Serial to Ethernet Gateway Module

Additional Information

Weight 0.015 kg
Dimensions 12 × 8 × 2 cm

Related Products

Image
Out of Stock

DFRobot SEN0314 MU Vision Sensor ESP32 AI Camera

7,279.00
Learn More
Image
Out of Stock

Arduino Alvik Robot AKX00066 - Educational ESP32 & STM32

14,219.00
Learn More
Image
Out of Stock

Generic HS-S31P Collision Sensor Switch Module

69.00
Learn More
Image
Out of Stock

M5Stack ESP32 PSRAM Timer Camera Fisheye (OV3660)

2,489.00
Learn More
Image
Out of Stock

Arducam Mega 5MP AF SPI Camera Module

4,499.00
Learn More
Image
Out of Stock

LilyGO T-Camera Plus ESP32 Module w/ OV2640 Fisheye Lens & 1.3-Inch IPS Display

2,299.00
Learn More
Image
Out of Stock

AI-Thinker ESP32-S Wi-Fi + Bluetooth 4.2 SoC Module w/ PCB Antenna

459.00
Learn More
Image
Out of Stock

Generic MINI KIT ESP32-WROOM-32 Dev Board w/ Type-C

559.00
Learn More
Image
Out of Stock

Waveshare ESP32 Serial Bus Servo Driver HAT

2,099.00
Learn More
Image
Out of Stock

Waveshare MLX90640 IR Array Thermal Imaging Camera, 32×24 Pixels, 110° FOV

6,769.00
Learn More
Image
Out of Stock

LilyGO T-Camera Plus ESP32 Camera Module w/ 1.3-Inch IPS Display

1,849.00
Learn More
Image
Out of Stock

Espressif ESP Thread BR-Zigbee GW Development Board

1,309.00
Learn More