Phrozen Engineering Rigid ONYX Pro410 Resin 1000g

For optimal results with Phrozen ONYX Pro410 Resin, use an LCD/DLP printer with a 405nm UV light source. Typical layer exposure times range from 2.5-4.0 seconds, depending on your printer's power and layer height. Always perform exposure calibration tests to fine-tune settings for your specific machine and environmental conditions to ensure proper curing.

After printing, thoroughly wash your parts in 95% or higher IPA for 3-5 minutes, ensuring all uncured resin is removed. Allow parts to dry completely before proceeding to post-curing. Post-cure using a 405nm UV curing station for 15-30 minutes, rotating parts to ensure even exposure, which maximizes mechanical properties and part durability.

Yes, ONYX Pro410 is specifically engineered for high rigidity and minimal deformation under stress, making it an excellent choice for functional components. Its robust material properties, including a Shore D hardness of 71 and high tensile modulus, ensure that printed parts maintain their shape and perform reliably in demanding applications such as jigs, fixtures, and sturdy prototypes.

Phrozen ONYX Pro410 Resin exhibits heat resistance up to 66°C, making it suitable for applications where moderate temperature stability is required. While not designed for extreme high-temperature environments, this characteristic provides sufficient thermal performance for many functional prototypes and end-use parts, preventing softening or warping under typical operating conditions.