Moresense MS10-1918S26M4 10GHz Ultrasonic Sensor 3-4m Range - UART/I2C/GPIO Interface
Moresense MS10-1918S26M4 10GHz Ultrasonic Sensor 3-4m Range - UART/I2C/GPIO Interface - Image 2
SKU: SENS-4191
📋 GST Invoice Available

Moresense MS10-1918S26M4 10GHz Ultrasonic Sensor 3-4m Range - UART/I2C/GPIO Interface

₹131.00 (Inclusive of all taxes)
Out of Stock

The Moresense MS10-1918S26M4 is a 10GHz ultrasonic ranging sensor module offering a 3-4m detection range with UART, I2C, and GPIO output interfaces. Its ultra-compact 19x18mm footprint and selectable low-power modes (51µA/26mA) make it ideal for integration into battery-powered IoT devices, robotics, and portable systems requiring precise, interference-resistant distance measurement.

Features

  • 10.5GHz operating frequency enables penetration of thin non-metallic materials like acrylic and glass.
  • Ultra-low power consumption mode draws only 51µA, ideal for battery-operated applications.
  • Compact 19mm x 18mm module with integrated adaptive calibration algorithm for stable performance.
  • Multi-interface support includes UART, I2C, and GPIO for flexible MCU integration (Arduino, Raspberry Pi, ESP32).
  • Wide 3.3V DC operating voltage and immunity to environmental factors like temperature, humidity, and dust.

Out of stock

Description

The Moresense MS10-1918S26M4 utilizes a 10.5-10.55GHz ultrasonic frequency band for precise distance sensing up to 4 meters. This high-frequency operation allows the sensor to penetrate thin, non-metallic obstructions, providing reliable detection in complex environments. The module incorporates an advanced adaptive calibration algorithm that actively mitigates interference, ensuring consistent and reliable ranging data even in dynamically changing conditions.

Designed for embedded and portable systems, the sensor supports a configurable dual-power mode: a standard 26mA operating current for high-performance sensing and an ultra-low 51µA sleep/standby mode to drastically extend battery life. Its 3.3V DC power requirement and standard digital communication protocols (UART, I2C) ensure straightforward compatibility with a wide range of microcontrollers and single-board computers, facilitating rapid prototyping and system integration.

Key Features

  • High-frequency 10.5GHz ultrasonic transducer for accurate, long-range detection up to 4 meters.
  • Dual operating power modes: Standard mode (26mA) and Ultra-Low Power mode (51µA) for optimized energy management.
  • Integrated adaptive calibration algorithm enhances reliability by compensating for environmental interference.
  • Compact and robust SMD module design (19mm x 18mm) for space-constrained PCB integration.
  • Multi-protocol interface support includes UART, I2C, and GPIO for maximum design flexibility.
  • Operates from a single 3.3V DC supply, compatible with common 3.3V logic microcontrollers.
  • Certified to FCC, CE, SRRC, ROHS, UL, and KC standards for global commercial and industrial use.

Applications

  • Robotics and drone navigation for obstacle avoidance and terrain following.
  • IoT asset tracking and presence detection in smart home and building automation.
  • Industrial machine guarding and non-contact level sensing in confined spaces.
  • Portable electronic tape measures and handheld distance measurement tools.
  • Battery-powered security devices for intrusion detection and perimeter monitoring.

Technical Specifications

Manufacturer Part NumberMS10-1918S26M4
Sensor TypeUltrasonic Ranging Sensor
Operating Frequency10.500 GHz – 10.550 GHz
Detection Range3 – 4 meters
Output InterfacesUART, I2C, GPIO
Supply Voltage3.3V DC
Operating Current26 mA (Standard), 51 µA (Ultra-Low Power)
Transmit Power-4 dBm
Antenna Beam Angle±60°
Sensing Output Time2 seconds
Module Dimensions19 mm x 18 mm
CertificationsFCC, CE, SRRC, ROHS, UL, KC

Frequently Asked Questions

What is the operating voltage for the MS10-1918S26M4 sensor?

The sensor operates on a 3.3V DC supply. It is designed for direct compatibility with common 3.3V logic microcontrollers like ESP32, STM32, and many ARM-based boards. Ensure your power source can provide stable 3.3V to avoid measurement inaccuracies or module damage.

What communication interfaces does this ultrasonic module support?

The module provides three interface options: UART (serial), I2C, and GPIO (digital pulse). You can select the desired mode via configuration. The I2C interface allows easy daisy-chaining with other sensors, while UART offers straightforward serial data reading. GPIO mode provides a simple digital echo or trigger pulse.

How do the two power consumption modes work?

The sensor features two modes: a Standard operating mode drawing approximately 26mA for continuous, high-performance ranging, and an Ultra-Low Power mode consuming only 51µA, typically used for periodic sampling or sleep states. The mode can be selected via software command to optimize battery life in portable applications.

Can this sensor detect objects through materials like glass?

Yes, due to its high 10.5GHz operating frequency, the ultrasonic waves can penetrate thin, non-metallic materials such as acrylic, glass, and certain plastics. This makes it suitable for behind-panel detection, enclosed container level sensing, or applications where the sensor must be protected behind a cover.

What is the beam angle and how does it affect detection?

The sensor has a wide ±60° antenna beam angle. This broad field of view is excellent for general presence detection but means objects at the edge of the range may be detected earlier than those directly ahead. For precise directional ranging, consider the beam pattern when mounting the sensor.

Package Includes

  • 1 x Moresense MS10-1918S26M4 10GHz Ultrasonic Sensor Module

Additional Information

Weight 0.01 kg
Dimensions 0.7 × 0.8 × 0.2 cm

Related Products

Image
Out of Stock

Cytron Easy MP3 Shield for Arduino

1,590.00
Learn More
Image
Out of Stock

BIGTREETECH BTT TMC2208 V3.0 Stepper Motor Driver

539.00
Learn More
Image
Out of Stock

LGT8F328P LQFP32 MiniEVB 5V (Pro Mini Compatible)

116.00
Learn More
Image
Out of Stock

Cytron 8-Channel RC Servo Controller Shield for Arduino

1,879.00
Learn More
Image
Out of Stock

DFRobot RS485 Shield for Arduino

939.00
Learn More
Image
Out of Stock

Elecrow Crowtail Base Board for Arduino Nano 2.0

239.00
Learn More
Image
Out of Stock

Seeed Studio Studio Grove Shield for Seeeduino XIAO

449.00
Learn More
Image
Out of Stock

Hiwonder RasAdapter V5.3 Expansion Board for Raspberry Pi

5,709.00
Learn More
Image
Out of Stock

STMicroelectronics STEVAL-IOM001V1 L6360 IO-Link Master Board

5,269.00
Learn More
Image
Out of Stock

Arduino MKR Connector Carrier (Grove Compatible)

2,709.00
Learn More
Image
Out of Stock

52Pi Level-Shift Shield for Arduino UNO Q

1,709.00
Learn More
Image
Out of Stock

SIMCom A7672S 4G LTE Pi HAT for Raspberry Pi

7,078.82
Learn More