SOP SOPLY-104 500kg Load Cell Sensor with Feet - 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable
SOP SOPLY-104 500kg Load Cell Sensor with Feet - 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable - Image 2
SKU: SENS-1534
📋 GST Invoice Available

SOP SOPLY-104 500kg Load Cell Sensor with Feet - 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable

₹4,509.00 (Inclusive of all taxes)
Out of Stock

The SOP SOPLY-104 is a 500kg capacity alloy steel load cell with a 2.0mV/V output, designed for integration into industrial weighing systems, batching controllers, and PLC-based automation. It operates on a 5-15V DC excitation voltage and includes a 2-meter cable for straightforward installation.

Features

  • 500kg capacity with 150% safe overload protection for robust industrial use.
  • High-precision 2.0mV/V output with 0.03% F.S. repeatability for accurate weight measurement.
  • Durable alloy steel construction ensures long-term stability and performance.
  • Wide 5-15V DC excitation voltage range compatible with standard instrumentation amplifiers.
  • Includes 2-meter cable and mounting feet for simplified installation and setup.

Out of stock

Description

The SOPLY-104 is a precision strain gauge load cell engineered for force and weight measurement up to 500kg. Its robust alloy steel body provides high structural rigidity and resistance to off-axis loading, while the internal Wheatstone bridge configuration delivers a stable 2.0mV/V analog output signal proportional to the applied load.

Designed for demanding industrial environments, the sensor features excellent specifications including low non-linearity (0.05% F.S.), minimal hysteresis (0.05% F.S.), and high insulation resistance (>5000MΩ). Its wide operating temperature range of -20°C to +80°C and IP-rated construction (implied by industrial design) ensure reliable performance in platform scales, hopper weighing, and process automation applications.

Key Features

  • High-Capacity Alloy Steel Build: Manufactured from durable alloy steel for exceptional strength, fatigue resistance, and long-term measurement stability under heavy loads.
  • Precision Strain Gauge Technology: Incorporates a bonded strain gauge bridge offering a calibrated 2.0mV/V output with low temperature drift on both zero and span.
  • Superior Metrological Performance: Delivers high accuracy with 0.05% F.S. non-linearity, 0.03% F.S. repeatability, and minimal creep for consistent readings.
  • Robust Safety & Durability: Features 150% safe overload and 200% ultimate overload ratings, with high insulation resistance for enhanced operational safety and longevity.
  • Integrated Installation Design: Comes with pre-attached mounting feet and a 2-meter shielded cable, simplifying mechanical integration and electrical connection.
  • Broad Electrical Compatibility: Supports a standard 5-15V DC excitation range, making it compatible with a wide array of industrial signal conditioners and weigh indicators.

Applications

  • Industrial platform scales and bench scales for manufacturing and logistics.
  • Hopper, silo, and tank weighing systems for inventory and process control.
  • Batching and filling machines in food processing, chemical, and pharmaceutical industries.
  • Force measurement and testing in mechanical test stands and material handling equipment.
  • Overload protection and monitoring systems for cranes, lifts, and heavy machinery.

Technical Specifications

ModelSOPLY-104 500kg
Capacity500 kg
Rated Output2.0 mV/V
MaterialAlloy Steel
Excitation Voltage5 – 15 V DC
Input/Output Impedance350 Ω
Non-Linearity≤ 0.05% F.S.
Hysteresis≤ 0.05% F.S.
Repeatability≤ 0.03% F.S.
Creep (30 min)≤ 0.05% F.S.
Zero Balance±1% F.S.
Safe Overload150% F.S.
Ultimate Overload200% F.S.
Operating Temperature-20°C to +80°C
Temperature Effect on Output0.05% F.S./10°C
Temperature Effect on Zero0.05% F.S./10°C
Insulation Resistance> 5000 MΩ @ 100V DC
Cable Length2 m
Thread SizeM12 × 1.75
Dimensions (LxWxH)70 mm x 25 mm x 60 mm
Weight630 g

Frequently Asked Questions

What is the required excitation voltage for this SOPLY-104 load cell?

The SOPLY-104 load cell operates on a standard DC excitation voltage range of 5 to 15 volts. A stable, regulated power supply within this range is recommended for optimal performance and to ensure the specified 2.0mV/V output signal accuracy is maintained.

How do I connect and interface this load cell with a microcontroller or weigh indicator?

The load cell outputs a low-level millivolt signal via its integrated 2-meter cable, typically with a 4-wire configuration (Excitation+, Excitation-, Signal+, Signal-). This signal must be amplified by a dedicated instrumentation amplifier or HX711-based load cell amplifier module before being read by an ADC on a microcontroller, PLC, or commercial weigh indicator.

What is the safe overload limit, and how is the load cell protected?

The load cell is rated for a safe overload of 150% of its 500kg capacity (750kg) without permanent damage. Its robust alloy steel construction and mechanical design provide this inherent protection. For ultimate safety, the cell can withstand a maximum overload of 200% (1000kg), though operation beyond the safe overload limit is not recommended for maintaining calibration.

Can this load cell be used outdoors or in wet environments?

While the alloy steel construction is durable, the specific IP rating is not provided in the datasheet. For outdoor or wet environments, it is crucial to protect the cable termination points and junction box from direct moisture ingress. For applications requiring guaranteed water resistance, a load cell with a specified IP67 or IP68 rating should be selected.

What mounting considerations are important for accurate measurement?

Accurate measurement requires proper mechanical installation. The included feet should be mounted on a flat, rigid base to minimize off-center or side loading, which can induce measurement errors. Ensure all mounting hardware is tightened to the specified torque (if provided) and that the load is applied evenly across the sensor's active axis.

Package Includes

  • 1 x SOP SOPLY-104 500kg Load Cell Sensor with pre-attached mounting feet
  • 1 x 2-meter integrated connection cable

Additional Information

Weight 0.63 kg
Dimensions 7 × 2.5 × 6 cm

Related Products

Image
Out of Stock

Generic DIY Pressure Sensor Kit 5kg Load Cell + HX711AD Module + 4P DuPont Wire Shell

549.00
Learn More
Image
Out of Stock

TE Connectivity FX29K0-040B-0050-L Compression Load Cell Sensor, 50lb (22.68kg) Capacity, 5.5V, 4-Wire Ribbon Cable

6,529.00
Learn More
Image
Out of Stock

Creality Auto-leveling strain gauge and sensor board for K1/K1C/K1 Max

219.00
Learn More
Image
Out of Stock

Pro-Range GSL315 100KN Tension & Compression Load Cell Sensor, ±0.05～0.1%F.S, 1.5～2.0mV/V, 10VDC, -20℃~＋65℃

19,819.00
Learn More
Image
Out of Stock

SOP SOP601-50kg Single Point Load Cell Sensor, 2.0 ± 0.15 mV/V, 0.02%, IP65, Aluminum Alloy

3,199.00
Learn More
Image
Out of Stock

YZC-133 5kg Load Cell Sensor with Wires 80 x 12 x 12mm

120.00
Learn More
Image
Out of Stock

Generic HX711 Pressure Sensor Test Board High-Precision Module - 24-bit ADC w/ Display

219.00
Learn More
Image
Out of Stock

Pro-Range GSP903 10 kN Rope Tension Load Cell Sensor, 0.3%F.S, 1.0-1.5mV/V, 10VDC

11,319.00
Learn More
Image
Out of Stock

SOP SOP601-10kg Single Point Load Cell Sensor, 2.0mV/V, 0.02% Precision

2,669.00
Learn More
Image
Out of Stock

Creality K2 Plus Strain Gauge

289.00
Learn More
Image
Out of Stock

SOP SOPLY-102-50KG Load Cell Sensor 50kg Capacity Alloy Steel - 2.0mV/V Output, 2m Cable

4,019.00
Learn More
Image
Out of Stock

Amphenol Wilcoxon LVEP050-TO5 Accelerometer Sensor, Ultra Low Power, 17kHz, 0.05V/g, 3-5.5VDC, TO5 Through Hole

22,039.00
Learn More