HS-S48-L Gyroscope Module - I2C Interface, PH2.0 3P Terminal
HS-S48-L Gyroscope Module - I2C Interface, PH2.0 3P Terminal - Image 2
SKU: SENS-1123
📋 GST Invoice Available

HS-S48-L Gyroscope Module - I2C Interface, PH2.0 3P Terminal

₹419.00 (Inclusive of all taxes)
Out of Stock

The HS-S48-L is a compact gyroscope module compatible with 3.3V and 5V logic systems, including Arduino, Raspberry Pi, and ESP32. It provides precise angular velocity measurement via a simple I2C interface for motion detection and orientation tracking applications.

Features

  • Dual 3.3V / 5V operating voltage for broad microcontroller compatibility.
  • I2C digital communication interface (SDA/SCL) for stable, fast data transfer.
  • Compact PCB footprint (23mm x 33mm) ideal for space-constrained embedded designs.
  • PH2.0 3P terminal provides a secure, solderless connection for power and data.
  • Designed for precise motion sensing in robotics, drones, and wearable technology.

Out of stock

Description

The HS-S48-L Gyroscope Module is a MEMS-based sensor designed to measure angular velocity along a single axis. It outputs digital data via the I2C protocol, simplifying integration with common development platforms. The module’s internal signal conditioning ensures stable readings suitable for motion analysis and stabilization systems.

Built on a compact PCB with a PH2.0 connector, the module is engineered for reliable performance in embedded applications. Its wide voltage compatibility allows for direct connection to both 3.3V and 5V logic families without requiring level shifters, making it a versatile component for prototyping and final product integration.

Key Features

  • Wide Voltage Compatibility: Operates from 3.3V to 5V DC, supporting Arduino, Raspberry Pi, ESP32, and other common microcontrollers.
  • Digital I2C Interface: Provides a stable, two-wire serial communication bus for precise angular rate data acquisition.
  • Compact Form Factor: Small PCB dimensions (approx. 23mm x 33mm) enable integration into tight spaces for drones and portable devices.
  • PH2.0 Connector: Features a reliable 3-pin terminal for secure power and signal connections without soldering.
  • MEMS Gyroscope Core: Utilizes a micro-electromechanical system sensor for accurate and responsive motion detection.
  • Optimized Performance-to-Cost Ratio: Delivers essential gyroscopic functionality in a durable, high-value module suitable for prototyping and production.

Applications

  • Drone flight controller stabilization and attitude hold systems.
  • Robotic platform balancing, navigation, and inertial measurement units (IMUs).
  • Wearable device motion tracking for activity monitoring and gesture recognition.
  • Camera gimbal stabilization for smoothing pan and tilt movements.
  • RC vehicle and model aircraft autopilot and orientation sensing.

Technical Specifications

Item TypeGyroscope Module
Model NumberHS-S48-L
Operating Voltage3.3V to 5V DC
Communication InterfaceI2C (SDA, SCL)
ConnectorPH2.0 3-Pin Terminal
Module Dimensions (L x W)Approx. 33mm x 23mm
Module WeightApprox. 3g
Primary OutputAngular Velocity (Digital)

Frequently Asked Questions

What is the operating voltage range for the HS-S48-L module?

The HS-S48-L Gyroscope Module is designed to operate from 3.3V to 5V DC. This dual-voltage support allows direct compatibility with a wide range of microcontrollers, including 3.3V systems like ESP32 and Raspberry Pi, as well as 5V systems like most Arduino boards, without requiring an external level shifter.

How do I connect and communicate with this gyroscope module?

Connect the module using its PH2.0 3-pin terminal: VCC to 3.3V/5V, GND to ground, and SDA/SCL to the corresponding I2C pins on your microcontroller. Communication is performed via the standard I2C protocol. You will need to use a suitable library to read the angular velocity data registers from the sensor's I2C address.

Is this module suitable for high-speed drone or robotics applications?

Yes, the HS-S48-L provides digital angular rate data via I2C, making it suitable for motion sensing in drones and robotics. Its compact size and lightweight design are ideal for these applications. For precise attitude estimation, it is often combined with an accelerometer and magnetometer to form a complete 9-DOF Inertial Measurement Unit (IMU).

Package Includes

  • 1 x HS-S48-L Gyroscope Module

Additional Information

Weight 0.003 kg
Dimensions 3.3 × 2.3 cm

Related Products

Image
Out of Stock

WTMotion HWT9053-485 High-Precision Motion IMU Sensor 200Hz Output - RS485 Interface, IP67 Aluminum Shell

55,649.00
Learn More
Image
Out of Stock

Generic GY-BNO055 9DOF 9-Axis Sensor Module - I2C/Serial Interface

1,709.00
Learn More
Image
Out of Stock

Elecrow Crowtail PIR Motion Sensor - 3-5V, 120° Angle, Max 6m Range

319.00
Learn More
Image
Out of Stock

Hi-Link HLK-LD2452 24GHz Millimeter-Wave Motion Sensor Module - 5V, 60° Azimuth, ±30° Pitch, 6m Range

839.00
Learn More
Image
Out of Stock

HANYOUNG NUX LES-02-1 Mono Lever Switch

1,859.00
Learn More
Image
Out of Stock

LSM303DLHC High-Precision 3-Axis Accelerometer & Magnetometer Module - I2C Interface

239.00
Learn More
Image
Out of Stock

Waveshare A121 60GHz mmWave Radar Module, High-Precision PCR - UART/I2C/GPIO Interface

2,729.00
Learn More
Image
Out of Stock

Hi-Link HLK-LD021 5.8GHz Radar Sensor Module, Human Presence & Motion Detection, Detection Range: 10-12m Radial - TTL Output

74.00
Learn More
Image
Out of Stock

Arduino Modulino Movement Module ABX00101

1,209.00
Learn More
Image
Out of Stock

DFRobot Gravity BMI323+BMM350 9DOF IMU Sensor Module (I2C/UART, Plug & Play)

2,309.00
Learn More
Image
Out of Stock

LSM303DLH GY-51 3-Axis Magnetic Field & Acceleration Module - I2C Interface

449.00
Learn More
Image
Out of Stock

Hi-Link HLK-LD2402G-W 24GHz Millimeter-Wave Motion Sensor Module - UART/GPIO Interface

173.00
Learn More