FlySky FS-A6 2.4GHz 6-Channel Receiver
FlySky FS-A6 2.4GHz 6-Channel Receiver - Image 2
FlySky FS-A6 2.4GHz 6-Channel Receiver - Image 3
SKU: DRFC-3327
📋 GST Invoice Available

FlySky FS-A6 2.4GHz 6-Channel Receiver

₹125.00 (Inclusive of all taxes)
Out of Stock

The FlySky FS-A6 is a compact 2.4GHz 6-channel PWM receiver designed for FlySky i4 and i6 transmitters, providing reliable control for lightweight FPV drones and RC models with a 4.0-6.5V DC input range.

Features

  • Compact 6-channel 2.4GHz receiver for FlySky i4/i6 transmitters.
  • Ultra-lightweight design at 10g for minimal impact on drone builds.
  • Wide input voltage range of 4.0-6.5V DC for flexible powering options.
  • High receiver sensitivity of -105dBm for stable signal reception.
  • Standard PWM output for direct servo and flight controller connection.

Out of stock

Description

The FlySky FS-A6 receiver is engineered for pilots seeking a reliable and lightweight control link for their FPV drones and RC aircraft. Its GFSK modulation and -105dBm sensitivity ensure a stable connection within the 2.4GHz band, compatible with the popular FlySky i4 and i6 transmitter platforms.

With dimensions of 45mm x 20mm and a weight of just 10 grams, the FS-A6 is optimized for builds where every gram counts, such as micro drones and lightweight racers. The three-pin interface (VCC, Ground, Signal) simplifies wiring, allowing it to be powered directly from a flight controller’s BEC or a dedicated UBEC within its 4.0-6.5V operating range.

Key Features

  • Lightweight & Compact Build: Measures 45x20mm and weighs only 10g, ideal for space-constrained micro and lightweight drone frames.
  • Stable 2.4GHz RF Link: Utilizes GFSK modulation with -105dBm receiver sensitivity for robust signal integrity in typical flying environments.
  • Broad Voltage Compatibility: Operates on 4.0-6.5V DC, making it compatible with standard 1S LiPo setups (with regulator) or 5V BEC outputs.
  • Simple PWM Interface: Features a standard 3-pin connector for straightforward integration with flight controllers, servos, and other PWM-based devices.
  • FlySky Protocol Native: Designed for seamless binding and operation with FlySky's i4 and i6 series of affordable transmitters.

Applications

  • Lightweight micro and nano FPV drone builds requiring a simple PWM receiver.
  • Entry-level and budget-friendly RC airplane and helicopter models.
  • DIY robotics and ground vehicle projects utilizing FlySky control systems.
  • Backup or secondary receiver for trainers and simulators using FlySky protocols.

Technical Specifications

Manufacturer Part NumberFS-A6
BrandFlySky
Channels6
Frequency Range2.4–2.5 GHz
ModulationGFSK
Receiver Sensitivity-105 dBm
Input Voltage4.0–6.5V DC
Dimensions (L x W)45 x 20 mm
Weight10 g
Interface3-pin (VCC, GND, Signal)
Compatible TransmittersFlySky i4, i6

Frequently Asked Questions

What transmitters are compatible with the FlySky FS-A6 receiver?

The FS-A6 receiver is natively compatible with FlySky's i4 and i6 series of 2.4GHz transmitters. It uses the standard FlySky AFHDS protocol for binding and communication. It is not compatible with other brands or protocols like FrSky, ExpressLRS, or Crossfire without a dedicated module.

What is the input voltage range for the FS-A6 receiver?

The FS-A6 receiver operates on a DC input voltage range of 4.0 to 6.5 volts. This allows it to be powered directly from a 5V BEC on a flight controller or ESC, a regulated 1S LiPo setup, or a dedicated UBEC. Exceeding 6.5V may damage the receiver.

How do I connect the FS-A6 receiver to my flight controller?

The FS-A6 provides a standard 3-pin PWM output (VCC, Ground, Signal). Connect the signal wire to any PWM or PPM input channel on your flight controller (e.g., the signal pin for Channel 1). Ensure the VCC and Ground pins are connected to a 5V BEC and ground, respectively, from your flight controller or power distribution board.

Is the FS-A6 receiver suitable for long-range FPV flying?

No, the FS-A6 is designed for short to medium-range applications typical of park flying and light FPV. With a sensitivity of -105dBm and operating on the crowded 2.4GHz band, its range is limited compared to dedicated long-range systems like ExpressLRS or Crossfire operating on 900MHz. It is best suited for lightweight builds within visual line of sight.

Package Includes

  • 1 x FlySky FS-A6 Receiver
  • 1 x Bind Plug

Additional Information

Weight 0.01 kg
Dimensions 4.5 × 2 cm

Related Products

Image
Out of Stock

RadioLink R8EF Receiver - 8-Channel SBUS/PPM/PWM

1,429.00
Learn More
Image
Out of Stock

Generic Pixhawk PPM Encoder Module

689.00
Learn More
Image
Out of Stock

Reflex Drive RD T-Series 12S 60A ESC

15,029.00
Learn More
Image
Out of Stock

8CH PWM PPM SBUS Signal Conversion Module

919.00
Learn More
Image
Out of Stock

RadioMaster R84 V2 Receiver

1,049.00
Learn More
Image
Out of Stock

L293D Motor/Servo Driver Shield for Arduino

119.00
Learn More
Image
Out of Stock

RadioMaster R88 V2 Receiver

1,429.00
Learn More
Image
Out of Stock

Reflex Drive RD D-Series 40A 2-6S ESC

4,182.00
Learn More
Image
Out of Stock

Arduino Uno Breakout Carrier - ASX00085

1,049.00
Learn More
Image
Out of Stock

Seagull UAV UAV #REC Camera Controller

8,282.00
Learn More
Image
Out of Stock

RadioLink Mini Pix Flight Controller

8,499.00
Learn More
Image
Out of Stock

RadioMaster R86 V2 Receiver

1,059.00
Learn More