RadioLink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM

The RadioLink R12DS receiver operates on a wide voltage range from 3V to 10V. This makes it compatible with various power sources, including regulated 5V BEC outputs from most ESCs or flight controllers, as well as direct 2S (7.4V) or 3S (11.1V) LiPo battery connections when used within the upper limit. Always ensure your power source provides clean, stable voltage within this range.

The R12DS provides a total of 12 control channels. All 12 channels are available via the SBUS serial output port for direct connection to flight controllers like Betaflight or iNav. For PWM output, it provides 11 individual channels on its pin headers for direct servo or ESC control. You must select the 12CH mode in the compatible RadioLink transmitter's SYSTEM CH settings for full functionality.

The R12DS receiver is compatible with the RadioLink AT9S, AT9S Pro, AT10, and AT10II 2.4GHz transmitters. Binding and setup procedures follow standard RadioLink protocols. For telemetry features like RSSI and voltage monitoring, you will need to add the optional PRM-01 telemetry module to the system.

Under optimal, unobstructed aerial conditions with minimal RF interference, the R12DS can achieve a control distance of up to approximately 4000 meters (2.49 miles). Ground-level range is typically reduced to around 2000 meters (1.24 miles) due to signal absorption and reflection. Actual range is highly dependent on your local environment, antenna placement, and regulatory restrictions, so always perform a controlled range test before long-distance flight.