SKU: DRFC-2367
📋 GST Invoice Available

iFlight XING NANO 0803 Brushless Motor - 17000KV

₹1,289.00 (Inclusive of all taxes)
Out of Stock

The iFlight XING NANO 0803 is a 17000KV brushless motor engineered for high-RPM performance in ultralight micro FPV drones and Tiny Whoops, delivering rapid acceleration and precise throttle response for 1.6″ to 2″ propeller setups.

Features

  • Ultra-high 17000KV rating for maximum RPM and acceleration in micro-class builds.
  • Extremely lightweight 2.1g design minimizes overall drone weight for enhanced agility.
  • Features N52H curved magnets and a 9N12P configuration for smooth, efficient power delivery.
  • Durable segmented bell rotor and NSK bearings ensure crash resilience and long-term reliability.
  • Standard 6x6mm M1.4 mounting pattern and 1mm shaft diameter for easy integration into micro frames.

Out of stock

Description

The XING NANO 0803 motor leverages a high-performance 9N12P electromagnetic design paired with N52H curved magnets to produce exceptional torque density and efficiency at its 17000KV rating. This results in blistering acceleration and top-end speed suitable for acrobatic micro FPV flight.

Constructed with a precision aluminum housing and a segmented bell rotor, the motor is engineered to dissipate heat effectively and maintain structural integrity during high-G maneuvers and impacts. The use of premium NSK bearings and single-strand copper winding minimizes rotational friction and electrical losses, contributing to smooth operation and extended flight times on 1S and high-voltage 2S LiPo configurations.

Key Features

  • High-Speed 17000KV Wind: Optimized for 1S-2S LiPo voltages, delivering extreme RPM for micro drone racing and freestyle.
  • Ultralight 2.1g Build: Precision-machined aluminum components and a compact 0803 stator size keep inertia low for instant throttle response.
  • Advanced Magnetic Circuit: N52H-grade curved magnets in a 9N12P configuration provide strong, consistent torque with minimal cogging.
  • Durable Rotor Assembly: Segmented bell design enhances cooling and impact resistance for crash-hardened performance.
  • Premium Bearing Support: Integrated NSK bearings ensure smooth, low-vibration rotation for stable flight and clean FPV video.
  • Micro-Frame Compatibility: Standard 6x6mm mounting pattern with M1.4 holes and a 1mm x 5.5mm shaft fits most popular micro drone frames.

Applications

  • High-performance 65mm to 75mm Tiny Whoop builds for indoor racing and acro.
  • Ultralight 2" micro freestyle and cinewhoop drones requiring maximum thrust-to-weight ratios.
  • Custom micro FPV racers utilizing 1S or high-voltage 2S LiPo batteries for explosive speed.
  • Compact drone builds where minimal weight and footprint are critical for agility and flight time.

Technical Specifications

Motor ModelXING NANO 0803
KV Rating17000 KV
Stator Size0803 (8mm stator diameter, 3mm height)
Weight2.1 grams
Configuration9N12P
Magnet GradeN52H Curved
Shaft Diameter1 mm
Shaft Length5.5 mm
Mounting Hole Pattern6x6 mm, M1.4
Bearing TypeNSK
Winding TypeSingle Strand Copper
Recommended Prop Size1.6" - 2.0"
Recommended Voltage1S - 2S LiPo

Frequently Asked Questions

What is the recommended battery voltage for the iFlight XING 0803 17000KV motor?

The XING 0803 17000KV motor is optimized for 1S (3.7V nominal) and 2S (7.4V nominal) LiPo battery configurations. On 2S, ensure your micro drone's electronic speed controllers (ESCs) and flight controller are rated for the higher voltage. Exceeding 2S is not recommended as it may overheat the windings and demagnetize the rotor.

What propeller size should I use with this 17000KV motor?

This motor is best paired with lightweight, small-diameter propellers in the 1.6-inch to 2.0-inch range. Common choices include 31mm or 40mm tri-blade props for 65mm-75mm Tiny Whoop frames, and 2-inch bi-blade or tri-blade props for slightly larger micro builds. Always bench-test with a smoke stopper to verify current draw matches your ESC's rating.

What is the mounting pattern and hardware size for the XING 0803 motor?

The motor features a standard 6x6mm mounting hole pattern. It requires M1.4 screws, which are typically included in the package. The shaft diameter is 1mm with a length of 5.5mm, compatible with standard micro propellers that use a 1mm bore or a press-fit adapter.

Package Includes

  • 1 x iFlight XING NANO 0803 17000KV Brushless Motor
  • 1 x Motor Screw Pack

Additional Information

Weight 0.017 kg
Dimensions 3 × 4 × 3 cm