Zerodrag NOVA BOOST Stack (F4 FC - ICM42688P + 55A 4-in-1 AM32 ESC)
Zerodrag NOVA BOOST Stack (F4 FC - ICM42688P + 55A 4-in-1 AM32 ESC) - Image 2
SKU: DRFC-1853
📋 GST Invoice Available

Zerodrag NOVA BOOST Stack (F4 FC - ICM42688P + 55A 4-in-1 AM32 ESC)

₹10,199.00 (Inclusive of all taxes)
Out of Stock

The Zerodrag NOVA BOOST Stack combines an F4 flight controller with an ICM42688P gyro and a 55A 4-in-1 ESC running AM32 firmware, designed for high-performance 3S-6S FPV drone builds requiring precise control and robust telemetry.

Features

  • 55A continuous per-motor 4-in-1 ESC with AM32 firmware for smooth, responsive throttle control.
  • F4 flight controller with ICM42688P gyro for stable flight performance and compatibility with Betaflight.
  • Supports 3S to 6S LiPo input voltage, providing versatility for a wide range of drone power systems.
  • Integrated current sensing and ESC telemetry for real-time performance monitoring and tuning.
  • 30.5×30.5mm mounting pattern with 4mm holes for standard frame compatibility and easy installation.

Out of stock

Description

The Zerodrag NOVA BOOST Stack is engineered as a unified power and control solution for demanding FPV and UAV applications. The 4-in-1 ESC utilizes a QF32 MCU and the open-source AM32 firmware, delivering exceptional DSHOT protocol support (150/300/600) and precise motor control across a 3S-6S voltage range. Its advanced current sensing provides critical telemetry data back to the flight controller for battery management and performance logging.

Built for electrical durability, the stack incorporates protective features including a TVS diode for voltage spike suppression and a high-quality Rubycon 35V 1000uF external capacitor to filter power noise and ensure stable operation. The integrated heat sink manages thermal loads during aggressive flight, maintaining component integrity. The compact 30.5×30.5mm footprint ensures compatibility with a vast array of 5-inch and larger FPV drone frames.

Key Features

  • High-performance AM32 ESC firmware on a QF32 MCU for ultra-smooth, low-latency motor control.
  • Comprehensive electrical protection with TVS diode and premium Rubycon filtering capacitor.
  • Active thermal management via an integrated aluminum heat sink for sustained high-current operation.
  • Full ESC telemetry support including current sensing for precise battery monitoring and flight data.
  • Robust mechanical design with a 30.5x30.5mm mounting pattern and 4mm hardware for secure frame integration.
  • F4 flight controller with the high-performance ICM42688P gyro for accurate flight stabilization.

Applications

  • High-performance 5-inch FPV racing drones requiring a reliable 4-in-1 ESC and F4 flight controller stack.
  • Freestyle drone builds utilizing 3S-6S LiPo batteries that benefit from AM32 ESC tuning and telemetry.
  • UAV platforms where integrated current sensing and stable ICM42688P gyro performance are critical.

Technical Specifications

Item TypeFC & ESC Stack
ESC Current Rating55A Continuous (per motor)
Power Input3S-6S LiPo
ESC MCUQF32
ESC FirmwareAM32
ESC ProtocolDSHOT150/300/600
Flight Controller MCUSTM32F4
Flight Controller GyroICM42688P
ProtectionTVS Protective Diode
Mounting Pattern30.5 x 30.5mm (4mm hole diameter)
Dimensions (LxW)38mm x 37mm
Weight10g (ESC component)

Frequently Asked Questions

What is the input voltage range for the Zerodrag BOOST Stack ESC?

The 4-in-1 ESC component of the BOOST Stack is rated for 3S to 6S LiPo battery input, covering a voltage range from approximately 11.1V to 25.2V. This makes it suitable for a wide spectrum of builds, from lightweight 3S setups to powerful 6S freestyle and racing drones.

Does this stack support ESC telemetry and current sensing?

Yes, the AM32-based ESC features advanced current sensing, providing real-time telemetry data back to the flight controller. This allows for battery current monitoring, capacity used tracking, and performance logging within Betaflight or other supported flight control software.

What mounting pattern does the Zerodrag NOVA BOOST Stack use?

The stack uses the industry-standard 30.5x30.5mm mounting pattern with 4mm diameter mounting holes. This ensures direct compatibility with the vast majority of 5-inch and larger FPV drone frames that support a stacked component layout.

What flight controller firmware is the NOVA FC compatible with?

The integrated F4 flight controller is designed to run Betaflight firmware. Its STM32F4 MCU and ICM42688P gyro sensor are fully supported by the latest Betaflight releases, enabling access to all standard features, filters, and tuning options for FPV drones.

Package Includes

  • 1 x Zerodrag NOVA BOOST Stack (F4 FC with ICM42688P + 55A 4-in-1 AM32 ESC)
  • 1 x XT60H Pigtail Cable
  • 1 x Rubycon 35V 1000uF Capacitor
  • 5 x Short Vibration Dampeners (6mm)
  • 5 x Tall Vibration Dampeners (8mm)

Additional Information

Weight 0.01 kg
Dimensions 3.8 × 3.7 cm

Related Products

Image
Out of Stock

T-Motor Velox V50A SE 6S 4-in-1 32-Bit 50A ESC

6,969.00
Learn More
Image
Out of Stock

DYS ARIA 45A 4-in-1 BLHeli_32 ESC 2-6S

5,369.00
Learn More
Image
Out of Stock

T-Motor CINE55A 8S 8-in-1 32Bit ESC 55A

32,169.00
Learn More
Image
Out of Stock

AxisFlying Argus PRO F7 FC & 65A BLHeli_32 ESC Stack

12,229.00
Learn More
Image
Out of Stock

AxisFlying Argus ECO F405 FC & 55A BLHeli_S ESC Stack

15,129.00
Learn More
Image
Out of Stock

JHEMCU BLHeli_32 40A 4-in-1 3-6S FPV Drone ESC

4,589.00
Learn More
Image
Out of Stock

BotDrive 8-bit 50A 4-in-1 ESC (3-6S LiPo)

4,499.00
Learn More
Image
Out of Stock

Flywoo GOKU 506S 50A 3-6S BL_S 4-in-1 ESC

5,009.00
Learn More
Image
Out of Stock

Zerodrag Boost AM32 55A 4-in-1 ESC

7,399.00
Learn More
Image
Out of Stock

DarkMatter Stack 460 Flight Controller - BRAMHA F4 FC + VISHNU 60A ESC

7,659.00
Learn More
Image
Out of Stock

EDITHFPV Ironcore H7 Plus Flight Controller

7,999.00
Learn More
Image
Out of Stock

iFlight BLITZ E55S 55A 2-6S 4-in-1 ESC

5,459.00
Learn More