EByte E18-2G4Z27SI ZigBee Module CC2530F256+CC2592 27dBm 2.4GHz
EByte E18-2G4Z27SI ZigBee Module CC2530F256+CC2592 27dBm 2.4GHz - Image 2
SKU: IOWC-1991
📋 GST Invoice Available

EByte E18-2G4Z27SI ZigBee Module CC2530F256+CC2592 27dBm 2.4GHz

₹759.00 (Inclusive of all taxes)
Out of Stock

The EByte E18-2G4Z27SI is a high-power 2.4GHz ZigBee wireless module based on the TI CC2530F256 SoC and CC2592 front-end, delivering up to 27dBm output power for long-range IoT mesh networks up to 2.5km. It operates at 3.3V and is designed for smart home automation and industrial sensor networks.

Features

  • High-Power ZigBee Transceiver: Integrates TI CC2530F256 SoC with CC2592 PA/LNA for a massive 27dBm (500mW) output power, enabling robust, long-range mesh network links up to 2.5km in open areas.
  • Excellent RF Sensitivity: Features a high receiver sensitivity of -98dBm, ensuring reliable data reception even from weak signals, critical for stable network performance in challenging RF environments.
  • Comprehensive GPIO & ADC Interface: Provides accessible GPIO, ADC, and PWM pins for direct sensor integration and peripheral control, simplifying node design for automation and monitoring applications.
  • Low-Power Operation for Battery Nodes: Offers optimized power consumption with 33mA receive current and deep sleep modes via the CC2530, making it suitable for battery-powered ZigBee end devices and routers.
  • Industrial-Grade Reliability: Operates across a wide -40°C to +85°C temperature range with SMD construction and ROHS compliance, ensuring durability for outdoor and industrial IoT deployments.

Out of stock

Description

The EByte E18-2G4Z27SI is a professional-grade 2.4GHz ZigBee RF module engineered for demanding wireless sensor networks and automation systems. Its core architecture combines the proven TI CC2530F256 system-on-chip—featuring an 8051 MCU, hardware AES encryption, and ZigBee PRO stack support—with the integrated CC2592 range extender. This pairing delivers exceptional +27dBm transmit power and high receiver sensitivity, dramatically extending the reliable communication distance for star or mesh network topologies.

Designed for seamless integration, the module operates from a single 3.3V supply and exposes critical interfaces including ADC, PWM, and multiple GPIOs for connecting sensors, actuators, and status LEDs. Its surface-mount form factor and integrated IPEX antenna connector allow for compact, low-profile PCB designs. The module’s power profile, with controlled transmit and receive currents, supports the creation of energy-efficient nodes that can operate for extended periods on battery power when utilizing the CC2530’s sleep modes.

Key Features

  • High-Output RF Front-End: CC2592 power amplifier and low-noise amplifier boost signal strength to 27dBm and enhance receiver sensitivity for superior range and link budget.
  • Full ZigBee PRO Stack Support: Based on the TI CC2530F256, enabling robust, self-healing mesh networks for large-scale device deployments in home and industrial automation.
  • Extended Temperature Operation: Certified for reliable performance from -40°C to +85°C, suitable for outdoor environmental monitoring and harsh industrial settings.
  • Integrated Antenna Interface: Features an IPEX connector for attaching external 2.4GHz antennas, allowing for optimized antenna selection and placement to maximize coverage.
  • Developer-Friendly Design: Provides direct access to ADC, PWM, and digital I/O pins, facilitating rapid prototyping and integration with common sensors without additional signal conditioning.
  • ROHS Compliant & SMD Package: Manufactured with lead-free processes in a compact surface-mount package for automated assembly and environmentally conscious production.

Applications

  • Smart Home Automation Hubs & Nodes: For lighting control, smart plugs, security sensors, and HVAC systems forming a reliable mesh network.
  • Industrial Wireless Sensor Networks (WSN): Remote monitoring of temperature, humidity, pressure, and equipment status in factories and warehouses.
  • Agricultural & Environmental Telemetry: Soil moisture sensing, weather station data collection, and livestock tracking across large areas.
  • Asset Tracking & Logistics: Monitoring the location and condition of pallets, containers, and high-value goods within a defined campus.
  • Building Energy Management: Sub-metering for electricity, water, and gas consumption with wireless data aggregation to a central gateway.

Technical Specifications

Wireless ProtocolZigBee (IEEE 802.15.4)
Core IC / SoCTI CC2530F256 + CC2592 Front-End
Frequency Range2.4GHz ISM Band
RF Output Power27 dBm (max)
Receiver Sensitivity-98 dBm
Transmission DistanceUp to 2.5 km (Open Area)
Supply Voltage3.3 V
Transmit Current182.5 mA (typical)
Receive Current33 mA (typical)
Supported InterfacesGPIO, ADC, PWM
Antenna ConnectorIPEX
Operating Temperature-40°C to +85°C
DimensionsApprox. 24mm x 16mm (Module)

Frequently Asked Questions

How do I configure the E18-2G4Z27SI module as a ZigBee coordinator or router?

You must program the TI CC2530F256 microcontroller using the TI Z-Stack protocol and a compatible IDE like IAR Embedded Workbench. Define the device type (coordinator, router, end-device) within the Z-Stack project configuration, compile the firmware, and flash it to the module via the debug interface (using a CC Debugger). The specific network parameters, like PAN ID and channel, are set in the firmware code before deployment.

What is the recommended power supply design for this 27dBm module?

A stable, low-noise 3.3V power supply capable of delivering at least 500mA peak current is essential, especially during high-power transmission bursts. Use a high-quality LDO or switching regulator with proper input/output filtering capacitors placed close to the module's VCC pins. For battery operation, consider a 3.7V Li-ion cell with a regulator and ensure the design accounts for the high transmit current to avoid voltage sag that can cause resets.

Can I use a different antenna, and what are the connector specifications?

Yes, you can attach any 2.4GHz antenna with an IPEX (U.FL) connector. Ensure the antenna has a 50-ohm impedance and is tuned for the 2.4GHz ISM band. For optimal range, select an antenna with appropriate gain and radiation pattern for your application. A simple 2.1dBi dipole provides omnidirectional coverage, while a higher-gain directional antenna can extend range for point-to-point links. Always secure the cable to prevent strain on the connector.

How do I interface sensors and read analog values with this module?

The module provides ADC input pins accessible via the CC2530's I/O ports. In your firmware, configure the desired pin as an analog input using the ADC driver functions from the TI HAL. Connect your sensor's analog output (ensure it's within the 0-3.3V range) to this pin, often with a series resistor for protection. You can then read the ADC value, convert it to a voltage, and apply your sensor's calibration formula to get the measured physical quantity.

Package Includes

  • 1 x EByte E18-2G4Z27SI ZigBee Wireless Module

Additional Information

Weight 0.01 kg
Dimensions 7 × 6 × 1 cm

Related Products

Image
Out of Stock

Sharp Microelectronics GP2AP03VT00F Distance Sensor, I²C Digital Output, Range: 1 cm~30 cm

269.00
Learn More
Image
Out of Stock

EByte E80-900M2213S LR1121 LoRa Dual-Band SPI RF Transceiver Module

879.00
Learn More
Image
Out of Stock

EByte E220-900T22S LoRa Module LLCC68 Chip 22dBm 850-930MHz w/ IPEX Antenna

569.00
Learn More
Image
Out of Stock

EByte E220-900M30S LoRa Module LLCC68 868MHz/915MHz 30dBm

879.00
Learn More
Image
Out of Stock

Honeywell SS59ET Board Mount Hall Effect/Magnetic Sensor, SOT-89-3 SMD/SMT, -1000 G to 1000 G Range

64.00
Learn More
Image
Out of Stock

EByte E22-900M30S SX1262/SX1268 1W 900MHz LoRa Module

1,039.00
Learn More
Image
Out of Stock

Saiya Sensor Sensor SYP16 Air Quality Module UART SMD, 20x24mm

529.00
Learn More
Image
Out of Stock

Vishay VCNL4020C-GS08 Ambient Light & Proximity Bio Sensor Module - I2C Interface

499.00
Learn More
Image
Out of Stock

Sharp Microelectronics GP2Y0D810Z0F Distance Measuring Sensor - Digital Output, 100mm Range

2,649.00
Learn More
Image
Out of Stock

AI-Thinker ESP-01F ESP8285 Serial Wi-Fi Module

184.00
Learn More
Image
Out of Stock

AI-Thinker Ai-WB2-13 Wi-Fi & BLE 5.0 Module w/ BL602 SoC

122.00
Learn More
Image
Out of Stock

AI-Thinker ESP-12S ESP8266 Serial Wi-Fi Module

209.00
Learn More