Alinx Z7-P Dev Board Kit with AMD Zynq UltraScale+ MPSoC XCZU7EV

The board is fully compatible with the AMD Vitis unified software platform and Vivado Design Suite for hardware design and programming. For software development, you can use PetaLinux or other Linux distributions built with Yocto. The board supports SDKs for AI frameworks like Vitis AI, enabling deployment of machine learning models on the FPGA fabric and Arm processors.

Connect your FMC-compatible module (e.g., a camera or ADC card) to the board's HPC connector. In Vivado, you must define the pin constraints for the LVDS or single-ended I/Os being used. Configure the Zynq MPSoC's programmable logic (PL) to implement the required interface protocol (e.g., MIPI CSI-2, LVDS) using IP cores. Finally, develop the driver software in Vitis to manage data acquisition and processing from the connected sensor.

Power consumption varies significantly based on the utilization of the Processing System (PS), Programmable Logic (PL), and active peripherals. Under a moderate load with the PL partially active and both Ethernet ports running, expect a draw of 15-25W from the 12V supply. For accurate measurement, use the onboard power monitoring points or an external meter. Implementing power gating and clock management in your design can optimize consumption for battery-sensitive applications.