Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board
Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board - Image 2
Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board - Image 3
Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board - Image 4
SKU: IOWC-1000
📋 GST Invoice Available

Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board

₹2,519.00 (Inclusive of all taxes)
Out of Stock

The Waveshare ESP32-P4-WIFI6-DEV-KIT is a high-performance AIoT development board featuring dual RISC-V cores, Wi-Fi 6/BLE 5 via ESP32-C6, and rich multimedia interfaces for advanced edge computing, HMI, and IoT prototyping.

Features

  • Powered by ESP32-P4 with dual-core + single-core RISC-V processors for AI and multimedia tasks.
  • Integrated ESP32-C6 provides Wi-Fi 6 (2.4GHz) and Bluetooth 5/BLE 5 for high-throughput, low-latency wireless.
  • Onboard 32MB PSRAM and 16MB Flash for demanding applications like computer vision and voice AI.
  • Comprehensive I/O includes MIPI-CSI/DSI for cameras/displays, USB OTG, Ethernet, PoE header, and audio interfaces.
  • Hardware security suite with Secure Boot, Flash Encryption, and TRNG for secure IoT deployments.

Out of stock

Description

The Waveshare ESP32-P4-WIFI6-DEV-KIT is engineered for next-generation AIoT and edge computing applications. It combines the processing muscle of the ESP32-P4’s dual-core RISC-V CPU with the advanced wireless capabilities of an integrated ESP32-C6 chip, delivering Wi-Fi 6 and Bluetooth 5 connectivity for robust, high-speed network performance. This architecture is optimized for low-power operation while handling intensive tasks like image processing and AI inference.

Beyond wireless, the board is built for system integration with a full suite of industrial interfaces. It features native MIPI-CSI and MIPI-DSI ports for connecting high-resolution cameras and displays, alongside USB 2.0 OTG, a 10/100 Mbps Ethernet PHY with PoE header support, and extensive GPIO for sensor networks. The onboard audio subsystem, including a microphone and speaker amplifier, enables voice-controlled applications, making it a complete platform for smart HMI, industrial control, and multimedia devices.

Key Features

  • High-performance RISC-V dual-core + single-core processor (ESP32-P4) clocked up to 400MHz.
  • Integrated ESP32-C6 co-processor for concurrent Wi-Fi 6 (802.11ax) and Bluetooth 5.0/BLE 5.0 operation.
  • Ample memory with 32MB PSRAM and 16MB NOR Flash for complex firmware and data buffers.
  • Multimedia-ready with MIPI-CSI camera interface, MIPI-DSI display interface, I2S, and onboard microphone.
  • Wired connectivity via USB 2.0 OTG, 10/100 Mbps Ethernet with PoE header, and SDIO 3.0 for storage.
  • Advanced security features including hardware encryption, Secure Boot, Flash Encryption, and True Random Number Generator (TRNG).
  • Expansion through 40-pin GPIO header supporting I2C, I3C, SPI, UART, ADC, and DAC.
  • Low-power design with multiple sleep modes suitable for battery-powered edge nodes.

Applications

  • AI-powered Human-Machine Interfaces (HMI) with touchscreen displays.
  • Edge computer vision and image processing for smart cameras and sensors.
  • Voice-controlled smart home automation and AI speech interaction devices.
  • Industrial IoT gateways with wired Ethernet and wireless Wi-Fi 6 backhaul.
  • Multimedia and digital signage systems with audio/video output.
  • High-performance IoT prototyping for developers requiring advanced connectivity and processing.

Technical Specifications

Microcontroller/SoCESP32-P4 + ESP32-C6
Wireless ProtocolsWi-Fi 6 (802.11ax 2.4GHz), Bluetooth 5.0 / BLE 5.0
Processor CoresRISC-V 32-bit Dual-Core + Single-Core
Clock FrequencyUp to 400 MHz
RAM32MB PSRAM, 768KB HP L2 Cache, 32KB LP SRAM
Flash Storage16MB NOR Flash
Key InterfacesMIPI-CSI, MIPI-DSI, USB 2.0 OTG, 10/100 Ethernet, SDIO 3.0, I2C/I3C, SPI, I2S, 40-pin GPIO
AudioOnboard MEMS microphone, audio jack, speaker amplifier header
Power FeaturesPoE (Power over Ethernet) header support
SecuritySecure Boot, Flash Encryption, TRNG, Key Management
Dimensions90mm x 55mm (approx.)

Frequently Asked Questions

How do I program the Waveshare ESP32-P4-WIFI6-DEV-KIT?

The board is programmable using the official Espressif ESP-IDF framework, which provides full support for the ESP32-P4 and ESP32-C6 chips. You can also use Arduino core support for ESP32 when available. Connect the board via its USB-C port to your computer, install the necessary toolchain and board definitions, then flash your compiled firmware. The process is similar to other ESP32 boards but requires the latest IDF version for P4 and C6 chip support.

What is the power supply requirement and does it support battery operation?

The board is typically powered via the USB-C port (5V) or through its dedicated power input pins. The integrated Power over Ethernet (PoE) header allows for single-cable power and data when used with a compatible PoE injector or switch. For battery operation, you can connect a Li-Po battery to the relevant pins and leverage the chip's advanced low-power sleep modes, which significantly reduce current consumption during idle periods for longer field deployment.

Can I connect a camera and display simultaneously?

Yes, the board features independent MIPI-CSI (Camera Serial Interface) and MIPI-DSI (Display Serial Interface) connectors, allowing you to connect a camera module and a display screen at the same time. This is ideal for building interactive devices like smart displays or vision-based HMIs. You will need compatible MIPI camera and display modules, and the firmware must be configured to manage both data streams, utilizing the ESP32-P4's dedicated image processing capabilities.

Package Includes

  • 1 x Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board
  • 1 x 8Ω 2W Speaker
  • 2 x Connecting Cable

Additional Information

Weight 0.041 kg
Dimensions 9 × 5.5 cm

Related Products

Image
Out of Stock

Waveshare Mini-computer Add-ons for Raspberry Pi CMs (without PA)

5,379.00
Learn More
Image
Out of Stock

Waveshare DIN Rail ABS Case for Raspberry Pi 4

379.00
Learn More
Image
Out of Stock

Waveshare ESP32-S3 4.3B 800x480 Touch LCD Dev Board Type B

4,829.00
Learn More
Image
Out of Stock

Waveshare USB AVR JTAGICE XPII Programmer & Debugger

11,859.00
Learn More
Image
Out of Stock

Waveshare Jetson Nano Metal Case (C) w/ Camera Holder

1,299.00
Learn More
Image
Out of Stock

Waveshare Open405R-C Package A, STM32F4 Dev Board

8,089.00
Learn More
Image
Out of Stock

Waveshare RP2350-Matrix Board w/ IMU & 8x8 RGB Matrix

1,099.00
Learn More
Image
Out of Stock

Waveshare PCIe to 2.5G Ethernet Board (C) for Raspberry Pi 5

1,189.00
Learn More
Image
Out of Stock

Waveshare 2.8inch Touch LCD Shield

1,619.00
Learn More
Image
Out of Stock

Waveshare PCIe to M.2 E Key HAT+ (D) for Raspberry Pi 5

709.00
Learn More
Image
Out of Stock

Waveshare ESP32-S3 7-inch Capacitive Touch Display Board

4,799.00
Learn More
Image
Out of Stock

Waveshare RP2350 1.85inch 360x360 Round LCD Dev Board

3,359.00
Learn More