Nexcomm SIM7600EI 4G LTE CAT1 Modem GPS/GNSS IoT Board
Nexcomm SIM7600EI 4G LTE CAT1 Modem GPS/GNSS IoT Board - Image 2
Nexcomm SIM7600EI 4G LTE CAT1 Modem GPS/GNSS IoT Board - Image 3
Nexcomm SIM7600EI 4G LTE CAT1 Modem GPS/GNSS IoT Board - Image 4
SKU: IOWC-0881
📋 GST Invoice Available

Nexcomm SIM7600EI 4G LTE CAT1 Modem GPS/GNSS IoT Board

₹5,860.00 (Inclusive of all taxes)
Out of Stock

The Nexcomm SIM7600EI is a multi-band LTE CAT1 cellular IoT module offering up to 10Mbps downlink speeds, integrated GPS/GNSS, and a rich set of interfaces (UART, USB, I2C, SPI). It is AT command controlled and compatible with Raspberry Pi and other embedded platforms for remote telemetry and asset tracking applications.

Features

  • Multi-band LTE CAT1 modem supporting FDD B1/B3/B5/B8 and TDD B40/B41 for global coverage, with fallback to HSPA+/UMTS and GSM/GPRS/EDGE networks.
  • Integrated GPS/GNSS receiver enables precise location tracking for IoT applications like fleet management and asset monitoring.
  • Compact LCC form factor pin-compatible with SIM5360 and SIM7100 modules, allowing for scalable, future-proof hardware designs.
  • Rich peripheral set includes UART, USB 2.0, SPI, I2C, and PCM interfaces for flexible sensor integration and system control.
  • Extensive protocol stack support for TCP/IP, HTTP/HTTPS, FTP/FTPS, SSL/TLS, and MQTT (via AT commands) simplifies cloud connectivity.

Out of stock

Description

The SIM7600EI module is a comprehensive cellular IoT solution built around a multi-band LTE CAT1 transceiver, delivering reliable, medium-speed data connectivity for remote monitoring and telemetry applications. Its architecture supports seamless fallback to 3G and 2G networks, ensuring operational continuity in areas with varying coverage. The integrated GNSS engine provides concurrent positioning data, making it ideal for mobile or fixed-location tracking scenarios.

Designed for embedded integration, the module features a low-profile LCC package and a comprehensive set of hardware interfaces, including high-speed USB for data and firmware updates, multiple serial ports for sensor networks, and digital audio paths. Power management is optimized for IoT deployments, supporting various low-power modes controlled via AT commands to conserve energy in battery-operated nodes.

Key Features

  • Global multi-band LTE CAT1 support with backward-compatible 3G/2G fallback ensures reliable connectivity across diverse regions.
  • Integrated multi-constellation GNSS (GPS, BeiDou, GLONASS) provides accurate, real-time location data for tracking applications.
  • Pin-to-pin compatibility with SIM5360 (HSPA+) and SIM7100 (LTE CAT3) modules protects hardware investment and simplifies product migration.
  • Comprehensive AT command set with support for TCP/IP, HTTP/HTTPS, FTP/FTPS, and SSL/TLS enables rapid application development.
  • USB 2.0 interface supports high-speed data transfer, firmware-over-the-air (FOTA) updates, and USB audio for voice applications.
  • Extensive driver support for Windows, Linux, and Android RIL facilitates integration with single-board computers and mobile OS platforms.
  • Low-power operating modes and configurable RF power output optimize energy consumption for battery-powered IoT devices.

Applications

  • Remote IoT Telemetry: For environmental monitoring, smart agriculture, and industrial sensor data logging with cellular backhaul.
  • Asset & Fleet Tracking: Real-time GPS location tracking combined with cellular data transmission for logistics management.
  • Mobile POS & Vending Machines: Secure payment processing and inventory reporting via HTTPS and SSL/TLS connections.
  • Video Surveillance & Alarm Systems: Medium-bandwidth transmission for image uploads and event-triggered alerts.
  • Connected Automotive & Telematics: OBD-II dongles, vehicle tracking, and emergency call (eCall) systems.

Technical Specifications

Wireless ProtocolsLTE CAT1, HSPA+, UMTS, EDGE, GPRS, GSM, GNSS
Chipset/ModuleSIM7600EI
LTE Frequency BandsFDD: B1/B3/B5/B8; TDD: B40/B41
Data Rate (LTE CAT1)Downlink: Up to 10 Mbps, Uplink: Up to 5 Mbps
Supply Voltage3.4V - 4.2V (Typical 3.8V)
InterfacesUART, USB 2.0, SPI, I2C, PCM, GPIO, Analog Audio
Antenna ConnectorsPrimary & Secondary Cellular (u.FL), GNSS (u.FL)
Control MethodAT Commands (3GPP TS 27.007, 27.005)
Operating Temperature-40°C to +85°C
Dimensions40mm x 66mm (LCC Package)

Frequently Asked Questions

How do I establish a data connection and get an IP address using AT commands?

First, ensure the SIM card is inserted and the module is powered (3.8V typical). Send 'AT+CPIN?' to check SIM status, then 'AT+CREG?' to verify network registration. Configure the APN with 'AT+CGDCONT=1,"IP","your_apn"'. Finally, activate the PDP context using 'AT+CGACT=1,1'. The module will assign a local IP, which you can confirm with 'AT+CGPADDR=1'. Use this IP for subsequent TCP or HTTP connections.

What is the procedure for enabling the integrated GNSS and reading location data?

Power the GNSS circuit by sending 'AT+CGNSPWR=1'. To start the GNSS engine, use 'AT+CGNSCHS=1' for hot start or 'AT+CGNSCMD=0,"$PMTK314,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0"' to enable all NMEA sentences. Once fixed, retrieve data with 'AT+CGNSINF' for a parsed string or enable continuous output with 'AT+CGNSTST=1'. Ensure the GNSS antenna has a clear sky view for optimal satellite acquisition.

How do I update the module's firmware via USB?

Download the official firmware update package from the manufacturer. Connect the module to your PC via the USB interface. Launch the provided firmware upgrade tool (e.g., SIMCom Upgrade Tool). Select the correct COM port assigned to the module's USB diagnostic interface. Load the .dfu or .bin firmware file into the tool. Ensure stable power and do not disconnect during the process. The tool will display progress and confirm upon successful completion.

Package Includes

  • 1 x SIM7600EI 4G LTE Modem GPS/GNSS IoT Board

Additional Information

Weight 0.018 kg
Dimensions 6.6 × 4 cm

Related Products

Image
Out of Stock

Raspberry Pi Build HAT - LEGO Robotics Controller

1,964.00
Learn More
Image
Out of Stock

Waveshare IMX708 12MP Autofocus Camera (IMX708-120)

3,359.00
Learn More
Image
Out of Stock

Raspberry Pi 5-inch Touch Display 2 Capacitive

5,379.00
Learn More
Image
Out of Stock

Raspberry Pi Compute Module 5 - 8GB RAM, 16GB eMMC

23,679.00
Learn More
Image
Out of Stock

Raspberry Pi CM5 - 2GB RAM, 16GB eMMC, Wi-Fi/BT 5.0

11,499.00
Learn More
Image
Out of Stock

DFRobot Gravity Arduino Shield for Raspberry Pi

1,559.00
Learn More
Image
Out of Stock

Raspberry Pi 3 Model A+

3,369.00
Learn More
Image
Out of Stock

LCD1602 RGB LCD HAT with Keypad for Raspberry Pi

916.00
Learn More
Image
Out of Stock

Raspberry Pi CM4 (4GB RAM, 32GB eMMC, Wi-Fi/BT)

15,329.00
Learn More
Image
Out of Stock

Raspberry Pi AI HAT+ with Hailo 8L (13 TOPS)

7,839.00
Learn More
Image
Out of Stock

Raspberry Pi Debug Probe

1,119.00
Learn More
Image
Out of Stock

Raspberry Pi RP2350A Microcontroller IC (Reel of 500)

50,869.00
Learn More