SKU: SBCD-1317
📋 GST Invoice Available

RP2040-Zero Microcontroller without Soldering

₹249.00 (Inclusive of all taxes)
Out of Stock

The RP2040-Zero is a compact, high-performance microcontroller board featuring the Raspberry Pi RP2040 chip with a dual-core ARM Cortex M0+ processor, 264KB SRAM, and 2MB Flash memory. Designed for embedded projects and IoT, this board offers extensive GPIOs and USB-C connectivity, ready for immediate use without soldering.

Features

  • Features the powerful dual-core ARM Cortex M0+ RP2040 microcontroller.
  • Integrates 264KB SRAM and 2MB of onboard Flash storage for programs and data.
  • Provides 29 multi-function GPIO pins, supporting SPI, I2C, and UART interfaces.
  • Equipped with a USB-C port for power, data, and drag-and-drop programming.
  • Comes pre-soldered, enabling immediate prototyping without additional assembly.

Out of stock

Description

The RP2040-Zero is a versatile, low-cost, and high-performance microcontroller board built around Raspberry Pi’s custom RP2040 silicon. Its compact footprint makes it ideal for space-constrained projects, while its design ensures broad compatibility with the existing Raspberry Pi Pico ecosystem.

At its core, the board features a dual-core ARM Cortex M0+ processor running at up to 133 MHz, coupled with 264KB of SRAM and 2MB of dedicated Flash memory. This configuration provides ample processing power and storage for a wide range of embedded applications, from simple sensor reading to more complex IoT tasks. Connectivity options are robust, including 29 multi-function GPIO pins, two SPI, two I2C, and two UART interfaces.

Furthermore, the RP2040-Zero incorporates USB 1.1 device and host support via its convenient USB-C connector, facilitating easy programming through drag-and-drop mass storage. Its eight Programmable I/O (PIO) state machines enable custom high-speed peripheral support, expanding its utility for specialized hardware interactions. With built-in low-power modes and an on-chip temperature sensor, it is well-suited for energy-efficient, battery-powered deployments.

Key Features

  • Microcontroller: RP2040 chip (Dual-core ARM Cortex M0+, up to 133 MHz).
  • Memory: 264KB SRAM and 2MB Flash storage.
  • GPIO: 29 multi-function GPIO pins (20 via edge pinout, others via solder points).
  • Communication Interfaces: 2x SPI, 2x I2C, 2x UART.
  • Analog Capabilities: 4x 12-bit ADC channels and 16x PWM channels.
  • USB Interface: USB 1.1 device and host support via USB-C connector.
  • Power Efficiency: Supports low-power sleep and dormant modes.
  • Timing: Integrated accurate clock and timers.
  • Environmental Sensing: On-chip temperature sensor.
  • Compatibility: Fully compatible with Raspberry Pi Pico accessories and code.
  • Programmable I/O: 8x Programmable I/O (PIO) state machines for custom peripherals.
  • Programming Method: Simple drag-and-drop programming over USB mass storage.

Applications

  • IoT device prototyping and development.
  • Embedded systems design and control.
  • Educational robotics and electronics projects.
  • Custom peripheral control using PIO state machines.
  • Low-power sensing and data logging applications.

Technical Specifications

ModelRP2040-Zero
ProcessorDual-core ARM Cortex M0+
Memory264KB SRAM, 2MB Flash
GPIO29 pins, 2x SPI, 2x I2C, 2x UART
USB InterfaceType-C

Frequently Asked Questions

What programming environments does the RP2040-Zero support?

The RP2040-Zero supports the Raspberry Pi C/C++ SDK, MicroPython, and CircuitPython. Programming is simplified with drag-and-drop via USB mass storage, enabling rapid development for both beginners and experienced users. This broad support offers flexibility for various project requirements and skill levels.

What are the key advantages of the RP2040-Zero over other microcontrollers?

The RP2040-Zero features a dual-core ARM Cortex-M0+ for parallel processing, 2MB Flash, and 8 Programmable I/O (PIO) state machines. These PIO units offload bit-banging tasks, making it ideal for custom hardware interfaces and high-speed communication protocols not typically found in other microcontrollers, enhancing its versatility.

How is the RP2040-Zero powered, and what is its typical power consumption?

The board is typically powered via its USB-C port, or through a 3.3V supply on its GPIO headers. It supports low-power sleep and dormant modes, making it suitable for battery-powered applications where energy efficiency is critical. Specific consumption varies based on application, but its design prioritizes efficiency.

Can the RP2040-Zero be used with standard Raspberry Pi Pico accessories?

Yes, the RP2040-Zero is designed with similar pinout and software compatibility to the Raspberry Pi Pico. This allows it to seamlessly integrate with most Pico-compatible expansion boards, sensors, and development tools, broadening its ecosystem support and simplifying project integration for users familiar with the Pico.

Package Includes

  • 1 x RP2040-Zero Microcontroller Board

Additional Information

Weight 0.03 kg
Dimensions 6 × 5 × 2 cm