SUNLU Water Washable Resin Grey 1kg

Store the resin in its original opaque bottle, sealed tightly in a cool, dry, and dark place. Avoid direct sunlight and temperatures above 30°C (86°F) to prevent premature curing and maintain shelf life. Proper storage ensures resin stability and performance for future use.

SUNLU Water Washable Resin is specifically formulated to cure optimally under UV light in the 365-405 nm range. Most standard LCD, DLP, and SLA 3D printers operate within this spectrum, ensuring efficient and complete polymerization for strong, accurate prints.

After printing, rinse your models thoroughly with clean tap water, ideally at room temperature. Use a soft brush to remove any residual uncured resin from crevices. Ensure all uncured resin is washed off before proceeding to the final post-curing stage for best results.

Yes, post-curing is essential for achieving optimal mechanical properties and surface hardness. After cleaning, fully dry the print, then expose it to 365-405nm UV light in a curing station or sunlight for typically 2-10 minutes, depending on size and UV intensity.

SUNLU Water Washable Resin is designed with a significantly lower odor profile compared to many traditional photopolymer resins. While some faint smell may be present during printing, it is much less noticeable, contributing to a more comfortable and less intrusive printing environment.