eSUN W300 16K Water-Washable Resin Brown 1kg

Optimal print settings vary by printer model. Typically, a layer height of 0.05mm, bottom exposure time of 20-30s, and normal exposure of 2.0-3.5s are good starting points. Always perform exposure calibration tests (e.g., R_E_R_F) to fine-tune settings for your specific machine and environmental conditions to ensure best results and print success.

After printing, rinse parts thoroughly with tap water to remove uncured resin. Use a soft brush for intricate areas. Ensure parts are completely dry before post-curing. Post-cure under a 395-405nm UV light source for 2-6 minutes, or until the part reaches its maximum hardness. Avoid over-curing to prevent brittleness.

While designed for 16K precision, this resin is compatible with most open-source LCD, DLP, and SLA 3D printers operating at a 395-405nm UV wavelength. However, always refer to your printer's specifications and perform calibration tests to ensure optimal compatibility and print performance, especially for older or non-standard machines.

Store the resin in its original opaque bottle in a cool, dry, and dark place, away from direct sunlight and heat sources. Ensure the cap is tightly sealed to prevent moisture absorption and accidental curing. Proper storage maintains resin shelf life and print quality for future use, avoiding premature degradation.

Yes, like all photopolymer resins, use in a well-ventilated area and wear appropriate PPE, including gloves and eye protection. Avoid skin contact and inhalation of vapors. If contact occurs, wash thoroughly with soap and water. Dispose of liquid resin responsibly according to local regulations; never pour down drains.