eSUN Standard Resin, Red, 1kg for LCD 3D Printers

For best results, print eSUN Standard Resin between 20-30°C. Base layer exposure times typically range from 20-60 seconds, with normal layers requiring 2-8 seconds per layer on LCD printers. Calibrate exposure based on your specific printer and ambient conditions to achieve optimal detail and adhesion.

After printing, clean models thoroughly by submerging them in high-concentration isopropyl alcohol (>95%) for approximately 30 seconds to remove uncured resin. Use a soft brush for intricate details if necessary. Ensure the model is dry before proceeding to post-curing under a 395-405nm UV light for optimal mechanical properties.

Yes, eSUN Standard Resin is suitable for functional testing and rapid prototyping, offering high rigidity and good molding accuracy. While it possesses reasonable mechanical strength, it's generally best for parts that don't endure extreme stress or long-term outdoor exposure. Always test the specific application for suitability.

Store eSUN Standard Resin in a cool, dark, and dry place, away from direct sunlight and heat, with the bottle tightly sealed. Prolonged exposure to UV light or heat can cause the resin to prematurely polymerize. Keep it out of reach of children and pets for safety.

Always wear appropriate personal protective equipment, including nitrile gloves and safety glasses, when handling eSUN Standard Resin. Work in a well-ventilated area to avoid inhaling fumes. In case of skin contact, wash thoroughly with soap and water. Dispose of liquid resin responsibly as per local regulations.