Wittelb WIN-SN-TnH-AHT20-AO-C Digital Temperature & Humidity Sensor - Analog Output (4-20mA)
Wittelb WIN-SN-TnH-AHT20-AO-C Digital Temperature & Humidity Sensor - Analog Output (4-20mA) - Image 2
Wittelb WIN-SN-TnH-AHT20-AO-C Digital Temperature & Humidity Sensor - Analog Output (4-20mA) - Image 3
SKU: SENS-3397
📋 GST Invoice Available

Wittelb WIN-SN-TnH-AHT20-AO-C Digital Temperature & Humidity Sensor - Analog Output (4-20mA)

₹5,637.00 (Inclusive of all taxes)
Out of Stock

The Wittelb WIN-SN-TnH-AHT20-AO-C is a digital temperature and humidity sensor module with a configurable 4-20mA analog output, designed for seamless integration into industrial PLCs, HVAC systems, and environmental monitoring setups operating on a 12-24V DC supply.

Features

  • High-precision AHT20 sensor for simultaneous temperature and humidity measurement.
  • Configurable 10-bit or 12-bit resolution 4-20mA analog current loop output.
  • Wide operating temperature range from -40°C to +85°C.
  • Low power consumption suitable for continuous monitoring applications.
  • Compact 85mm x 85mm board format for easy panel or DIN rail mounting.

Out of stock

Description

This sensor module integrates a high-accuracy AHT20 digital sensor, providing stable and reliable measurements of ambient temperature and relative humidity. The onboard signal conditioning circuitry converts the digital sensor data into a standardized 4-20mA analog current signal, ensuring robust noise immunity and compatibility with industrial control systems over long cable runs.

Designed for durability, the module operates across a wide -40°C to +85°C range, making it suitable for harsh environments from outdoor weather stations to industrial process monitoring. Its 12-24V DC wide-range input simplifies power supply design and integration into existing 24V industrial control panels.

Key Features

  • High-Accuracy Sensing: Utilizes the AHT20 MEMS sensor for precise temperature (±0.3°C) and humidity (±2% RH) readings.
  • Industrial-Standard Output: Provides an isolated 4-20mA current loop output, configurable for 10-bit or 12-bit resolution.
  • Robust Power Design: Accepts a wide 12-24V DC input, compatible with standard industrial power supplies.
  • Extended Environmental Range: Operates reliably from -40°C to +85°C, suitable for demanding applications.
  • Compact & Mountable: The 85mm x 85mm PCB features mounting holes for secure installation.
  • Optimized Performance-to-Cost Ratio: Delivers industrial-grade signal conditioning and sensor accuracy in a value-engineered module.

Applications

  • Industrial HVAC and Building Automation System (BAS) monitoring and control.
  • Environmental monitoring in greenhouses, warehouses, and agricultural facilities.
  • Process control and condition monitoring in manufacturing and cleanrooms.
  • Integration into PLC or SCADA systems via 4-20mA input modules.
  • Outdoor weather station and air quality monitoring network nodes.

Technical Specifications

Item TypeTemperature and Humidity Sensor Module
Model NumberWIN-SN-TnH-AHT20-AO-C
Core SensorAHT20
Supply Voltage12-24 VDC
Operating Current~1 A (max)
Output Signal4-20mA Analog Current Loop (10-bit/12-bit configurable)
Temperature Measurement Range-40°C to +85°C
Humidity Measurement Range0% to 100% RH (typical)
Board Dimensions (L x W)85 mm x 85 mm
Weight (approx.)0.257 kg

Frequently Asked Questions

What is the output signal of this sensor module?

The module provides a configurable 4-20mA analog current loop output. You can select between 10-bit or 12-bit resolution for the current signal, which corresponds linearly to the measured temperature and humidity values. This standard industrial signal is ideal for long-distance transmission with high noise immunity.

What is the required power supply voltage?

The module operates on a wide-range DC input of 12 to 24 volts. This makes it directly compatible with common 24V industrial power supplies and 12V battery systems. Ensure your power source can provide up to approximately 1 Amp to reliably power the module and drive the current loop.

How do I wire and interface this 4-20mA sensor?

Connect the DC power supply (12-24V) to the designated V+ and GND terminals. The 4-20mA output is typically a two-wire loop: one wire carries the supply power into the module, and the same wire carries the current signal out to your PLC's analog input or a precision resistor to convert the current to a voltage for measurement.

What is the measurement range and accuracy?

The module uses an AHT20 sensor capable of measuring temperature from -40°C to +85°C and relative humidity from 0% to 100% RH. Typical accuracy is ±0.3°C for temperature and ±2% for relative humidity. The wide operating range makes it suitable for both indoor and harsh outdoor environments.

Package Includes

  • 1 x WIN-SN-TnH-AHT20-AO-C Digital Temperature and Humidity Sensor Module

Additional Information

Weight 0.257 kg
Dimensions 8.5 × 8.5 cm

Related Products

Image
Out of Stock

ELEGOO Neptune 4 Plus/4 Max Thermistor

199.00
Learn More
Image
Out of Stock

Generic PH-05 Portable Water Quality Tester pH Detector - Temperature Display & ATC

402.00
Learn More
Image
Out of Stock

FrSky Smart Port RPM and Temperature Sensor

2,319.00
Learn More
Image
Out of Stock

Sonoff TH10 Smart Temperature & Humidity Switch

875.00
Learn More
Image
Out of Stock

Original Prusa Heatbed Thermistor Set (MK3/S/+)

961.00
Learn More
Image
Out of Stock

NTC3950 Thermistor Sensor with XH2.54 Cable

64.00
Learn More
Image
Out of Stock

Generic SHT10 Soil Temperature & Humidity Sensor Module - Digital Output

1,909.00
Learn More
Image
Out of Stock

LM75 Digital Temperature Sensor Module I2C 3.3V-5V

209.00
Learn More
Image
Out of Stock

Arduino MKR Therm Shield ASX00012

5,659.00
Learn More
Image
Out of Stock

Creality Hotbed Thermistor

69.00
Learn More
Image
Out of Stock

Bambu Lab Heat Bed Signal Cable for X1,X1C,P1P,P1S,X1E

723.86
Learn More
Image
Out of Stock

Digilent MCC 134: Thermocouple DAQ HAT for Raspberry Pi

16,659.00
Learn More