7Semi ENS210 Humidity and Temperature Sensor Breakout, -40°C to 100°C - I2C Digital
The 7Semi ENS210 is a high-precision digital temperature and humidity sensor breakout module featuring I2C communication for seamless integration with Arduino, Raspberry Pi, ESP32, and other 3.3V/5V microcontroller platforms. It delivers calibrated, low-power environmental sensing from -40°C to 100°C.
Features
- High-precision digital sensing with ±0.15°C temperature and ±2.0% RH humidity accuracy.
- Ultra-low power operation: 6.6 µA active current at 1Hz sampling for battery-powered IoT systems.
- Standard I2C digital interface (100/400 kbit/s) for easy microcontroller and SBC integration.
- Wide operating range from -40°C to 100°C and 0% to 100% relative humidity.
- Compact breakout board design with pre-soldered headers for rapid prototyping.
Out of stock
The 7Semi ENS210 breakout module integrates a factory-calibrated digital sensor IC for simultaneous temperature and humidity measurement. It employs a capacitive sensing element for humidity and a band-gap sensor for temperature, delivering stable, pre-processed digital readings via the I2C bus, eliminating the need for external signal conditioning.
Designed for low-voltage embedded systems, it operates from 1.71V to 3.6V, making it compatible with both 3.3V and 5V logic (with appropriate level-shifting). Its minimal power draw and standby mode make it ideal for continuous environmental monitoring in IoT networks, HVAC control systems, and portable data loggers where energy efficiency is critical.
Additional Information
| Weight | 0.003 kg |
|---|---|
| Dimensions | 1.1 × 1.9 × 0.6 cm |
