SKU: DRFC-2935
📋 GST Invoice Available

Generic A2212 1000KV Brushless DC Motor with SimonK 30A ESC and OrangeRX HD 1045 Propeller Set - Black

₹716.76 (Inclusive of all taxes)
Out of Stock

The Generic A2212 1000KV Brushless Motor is a value-oriented combo kit featuring a SimonK 30A ESC and OrangeRX HD 1045 propellers, designed for entry-level multirotor builds and RC aircraft operating on 2S-3S LiPo batteries.

Features

  • A2212 1000KV brushless outrunner motor with 3.17mm shaft diameter and 150W max power rating.
  • Includes a SimonK firmware 30A ESC with an onboard 5V/3A BEC for servo power.
  • Kit contains one pair (1CW+1CCW) of OrangeRX HD 1045 (10×4.5) ABS propellers.
  • Compatible with 2S to 3S LiPo battery packs for lightweight quadcopter and airplane applications.
  • Features a solid metal motor case and includes a prop adapter, X-type motor mount, and mounting hardware.

Out of stock

Description

This A2212 1000KV brushless motor combo provides a foundational power system for beginner drone and RC aircraft projects. The outrunner design delivers adequate thrust for lightweight frames, such as the popular Q450 quadcopter platform, while the included SimonK-flashed 30A ESC ensures reliable throttle response and bidirectional motor control.

The motor’s construction utilizes a steel case for basic durability, though it is designed for entry-level use with corresponding performance characteristics. The package is completed with a balanced pair of 10-inch diameter, 4.5-inch pitch ABS propellers from OrangeRX, creating a ready-to-install propulsion set for testing and development builds.

Key Features

  • 1000KV outrunner brushless motor optimized for 2S-3S voltage range.
  • SimonK firmware on the 30A ESC enables smooth acceleration and bi-directional operation.
  • Onboard 5V/3A BEC provides regulated power for flight controllers, receivers, or servos.
  • Includes a complete mounting kit with prop adapter and X-type motor holder.
  • OrangeRX HD 1045 propellers are pre-balanced for reduced vibration.
  • Solid metal motor housing offers basic impact resistance for training and prototyping.
  • Motor connectors are pre-soldered (female 3.5mm bullets) for simplified wiring.

Applications

  • Entry-level 450-size quadcopter builds (e.g., Q450 frame) for training and aerial photography.
  • Lightweight RC airplane and glider propulsion systems requiring moderate thrust.
  • Prototyping and testing platforms for DIY drone enthusiasts on a budget.
  • Small-scale multirotor projects like tricopters or hexacopters designed for low-altitude flight.

Technical Specifications

Motor ModelA2212
Motor KV1000 KV
Motor TypeBrushless Outrunner
Shaft Diameter3.17 mm
Max Power150 W
Max Efficiency Current4-10 A
No-Load Current500 mA
Internal Resistance90 mΩ
Pole Count14
Motor Dimensions (L x W)27.5 x 27 mm
ESC ModelSimonK 30A
ESC BEC5V / 3A
ESC Constant Current30 A
ESC Dimensions (L x W x H)45 x 24 x 9 mm
Compatible Battery2S-3S LiPo
Propeller ModelOrangeRX HD 1045
Propeller Size10x4.5 inch
Propeller MaterialABS
Propeller Configuration1CW + 1CCW (Pair)
Propeller Shaft Hole7mm (Flat Side) / 8mm (Round Side)
ColorBlack

Frequently Asked Questions

What is the maximum recommended battery for this A2212 1000KV motor and ESC combo?

This combo is rated for 2S to 3S LiPo batteries. Exceeding 3S (12.6V) may overheat the motor and exceed the 30A current rating of the ESC, potentially causing failure. Always use a battery within the specified voltage range and monitor temperatures during initial flights.

Does the included 30A ESC have a Battery Elimination Circuit (BEC) for powering other components?

Yes, the SimonK 30A ESC features an onboard switching BEC that outputs a regulated 5V at up to 3A. This can power your flight controller, receiver, and servos, eliminating the need for a separate BEC or power module in your build.

Can I reverse the rotation direction of this brushless motor?

Yes. The motor is bi-directional. You can reverse its rotation by swapping any two of the three motor leads connected to the ESC. Alternatively, many flight control firmware options, like Betaflight, allow you to set motor direction digitally via software configuration.

What size quadcopter frame is this motor and propeller set best suited for?

The included OrangeRX HD 1045 (10-inch) propellers are ideally matched for frames in the 400-500mm diagonal size class, such as the F450 or Q450. This setup provides efficient thrust for lightweight, entry-level aerial photography or training quadcopters.

Package Includes

  • 1 x A2212 1000KV Brushless DC Motor with Soldered Female 3.5mm Connectors
  • 1 x Propeller Adapter
  • 1 x X-Type Motor Holder with Mounting Screws
  • 1 x SimonK 30A BLDC ESC with Male 3.5mm Connectors
  • 1 x Pair OrangeRX HD 1045 (10x4.5) ABS Propellers (1CW + 1CCW) - Black

Additional Information

Weight 0.067 kg