SKU: DRFC-2717
📋 GST Invoice Available

Quanteon QPT 2807 KV1300 Brushless Motor

₹2,619.00 (Inclusive of all taxes)
Out of Stock

The Quanteon QPT 2807 KV1300 brushless motor is engineered for high-efficiency, long-range, and endurance-focused drone builds, delivering up to 2500g of thrust with a peak power handling of 1250W.

Features

  • 1300 KV rating optimized for efficient 4S-6S LiPo operation and long flight times.
  • Delivers a maximum thrust of 2500 grams with a peak current draw of 50A.
  • Features a low internal resistance of 86 ± 3 µΩ for improved efficiency and reduced thermal load.
  • Robust construction with a 4.88mm shaft and a total weight of 58g.
  • Includes a comprehensive fitting accessory set for simplified installation.

Out of stock

Description

The QPT 2807 KV1300 is a high-performance brushless motor designed for pilots prioritizing flight efficiency and endurance. Its 1300 KV rating is ideally matched with medium-to-large propellers on 4S to 6S LiPo batteries, providing a potent balance of torque and RPM for sustained cruising and payload carrying.

Engineered with a focus on electrical efficiency, the motor’s exceptionally low internal resistance minimizes power loss as heat, translating to longer flight times and cooler operating temperatures under sustained load. The durable stator and bearing assembly ensure reliable performance across hundreds of flight cycles.

Key Features

  • High-torque 2807 stator size provides excellent power density for its weight class.
  • Precision-balanced rotor and high-grade N52SH magnets for smooth, vibration-free operation.
  • Optimized magnetic circuit and low-loss stator laminations enhance overall efficiency.
  • Robust 4.88mm steel shaft and dual ball bearings ensure long-term mechanical reliability.
  • 24cm long, high-strand-count silicone wires allow flexible routing in tight builds.
  • Thermally efficient design manages heat effectively during high-power, long-duration flights.

Applications

  • 5-inch and 6-inch long-range FPV drones requiring efficient 4S-6S propulsion.
  • Heavy-lift cinematography platforms and mapping drones carrying payloads like cameras or sensors.
  • Endurance-focused fixed-wing UAVs and VTOL aircraft.
  • Custom robotics and aerial vehicle projects demanding reliable, high-torque brushless power.

Technical Specifications

ModelQPT 2807 KV1300
KV Rating1300 KV
Stator Size28mm x 7mm
Max Thrust2500 g
Max Power1250 W
Max Current50 A
Internal Resistance86 ± 3 µΩ
Shaft Diameter4.88 mm
Shaft Length15.19 mm
Dimensions (Dia. x Length)34 x 43.05 mm
Weight58 g
Wire Length24 cm

Frequently Asked Questions

What is the recommended battery voltage (cell count) for this 1300KV motor?

The QPT 2807 KV1300 motor is optimally paired with 4S to 6S LiPo battery packs (14.8V to 22.2V). This voltage range allows the motor to operate within its efficient power band, providing strong thrust for long-range cruising and payload lifting without excessive current draw or thermal stress.

What propeller size is suitable for this motor?

For 4S operation, propellers in the 6x4 to 7x4.5 range are recommended. For 5S or 6S setups, slightly smaller or lower-pitch props like 6x3 or 5.5x4.5 are advisable to keep current within the motor's 50A peak limit. Always test with a current meter when pairing with new props.

What is the motor's mounting hole pattern?

The motor features a standard 16x19mm mounting hole pattern (M3 screw size). This pattern is compatible with a wide range of 5-inch and 6-inch drone frames and motor mounts designed for 28xx-series motors.

Is this motor suitable for aggressive freestyle or racing FPV?

While capable, its 1300KV rating and design prioritize efficiency and torque over ultra-high RPM. It is better suited for long-range, cinematic, or heavy-lift applications where sustained power and flight time are more critical than instantaneous punchouts typical of freestyle or racing.

Package Includes

  • 1 x Quanteon QPT 2807 KV1300 Brushless Motor
  • 1 x Fitting Accessory Set (mounting screws, nuts, etc.)

Additional Information

Weight 0.071 kg
Dimensions 5.5 × 5.5 × 4 cm