SKU: DRFC-2202
📋 GST Invoice Available

TS5823 200mW 40CH Mini Video Transmitter Module - RP-SMA/SMA

₹1,349.00 (Inclusive of all taxes)
Out of Stock

The TS5823 is a compact 5.8GHz 200mW video transmitter module supporting 40 channels, designed for micro and small FPV drones requiring a lightweight, low-current video link.

Features

  • 5.8GHz 40CH video transmitter with 200mW RF output power.
  • Wide 7-24V input voltage range for compatibility with 2S to 6S LiPo systems.
  • Ultra-compact footprint measuring 40x20x8mm and weighing only 10g.
  • Supports both RP-SMA and SMA antenna connector types.
  • Low operating current of 0.19A for minimal power system drain.

Out of stock

Description

The TS5823 Mini Video Transmitter provides a reliable, low-power video transmission solution for micro FPV builds, CineWhoops, and small multirotors. Its 7-24V input range allows direct connection to a wide array of flight controller BECs or LiPo batteries without requiring a separate voltage regulator.

Engineered for clean signal transmission, it features an 8MHz video bandwidth and 6.5MHz audio bandwidth, ensuring crisp FPV feed quality. The module’s aluminum casing aids in heat dissipation during sustained operation, maintaining stable performance across an operating temperature range of -10°C to 85°C.

Key Features

  • Micro Form Factor: 40x20x8mm dimensions enable installation in the tightest of frames and micro drone builds.
  • Broad Voltage Compatibility: 7-24V input range supports direct wiring to 2S, 3S, 4S, and even 6S LiPo setups.
  • Dual Antenna Connector Support: Accommodates both RP-SMA and SMA antenna types for flexible antenna selection.
  • Optimized for Low Current Draw: Consumes only 0.19A, preserving flight time on small-capacity batteries.
  • Full Channel Spectrum: Covers 40 channels across the 5.6-5.9GHz band for clear frequency selection and interference avoidance.
  • Robust Thermal Design: Metal housing provides effective heat sinking for consistent 200mW output.

Applications

  • Micro and Nano FPV drone builds requiring minimal weight.
  • 2S to 4S CineWhoop platforms for indoor/outdoor cinematic flight.
  • Small-scale multirotor models (e.g., 250-350 class).
  • FPV rover or ground vehicle video systems.
  • Backup or secondary video link on larger experimental aircraft.

Technical Specifications

Item TypeVideo Transmitter Module
RF Output Power200mW
Frequency Range5.6GHz - 5.9GHz (5645-5945MHz)
Channels40CH
Input Voltage7V - 24V
Operating Current0.19A
Video Bandwidth8MHz
Audio Bandwidth6.5MHz
Antenna ConnectorRP-SMA / SMA
Operating Temperature-10°C to 85°C
Dimensions (LxWxH)40mm x 20mm x 8mm
Weight (Module)10g

Frequently Asked Questions

What is the input voltage range for the TS5823 transmitter?

The TS5823 accepts a wide input range from 7V to 24V DC. This makes it directly compatible with 2S (7.4V), 3S (11.1V), 4S (14.8V), and even 6S (22.2V) LiPo battery systems without requiring an external BEC, simplifying wiring in most FPV builds.

What type of antenna connector does it use?

This transmitter module supports both RP-SMA and SMA female connector types. The included threaded detachable antenna typically uses one of these standards, but you can replace it with any compatible 5.8GHz antenna matching the connector you choose to use.

Is this VTX suitable for a tiny whoop or micro drone?

Yes, its ultra-compact size (40x20x8mm), light weight (10g), and low current draw (0.19A) make it an ideal choice for tiny whoops, micro drones, and other small aircraft where saving every gram and millimeter is critical for flight performance.

How many channels does it have and how do I change them?

It features 40 channels across the 5.6-5.9GHz band. Channel selection is typically done via a physical button or dip-switch combination on the module itself. Refer to the specific labeling on your unit to cycle through the available channels.

Package Includes

  • 1 x TS5823 Mini 40CH 200mW Transmitter Module
  • 1 x Threaded Detachable Antenna
  • 1 x AV Cable

Additional Information

Weight 0.015 kg
Dimensions 4 × 2 × 0.8 cm