CC3D Receiver Cable
CC3D Receiver Cable - Image 2
CC3D Receiver Cable - Image 3
CC3D Receiver Cable - Image 4
CC3D Receiver Cable - Image 5
SKU: DRFC-1827
📋 GST Invoice Available

CC3D Receiver Cable

₹139.00 (Inclusive of all taxes)
Out of Stock

This 6-in-1 CC3D receiver cable provides essential PWM signal and power connections for CC3D, MINI CC3D, and CC3D EVO flight controllers, featuring a 150mm super-soft silicone harness with color-coded JST-SH connectors.

Features

  • 6-in-1 wiring harness for CC3D, MINI CC3D, and CC3D EVO flight controllers.
  • Super-soft silicone cable construction with 150mm (5.9-inch) total length.
  • Color-coded JST-SH servo connectors for simplified PWM channel mapping.
  • Supports 4.8V-15V unregulated power input and 5V-tolerant signal lines.
  • Enables direct connection of up to 6 PWM receivers or servo outputs.

Out of stock

Description

The CC3D Receiver Cable is a dedicated wiring harness designed to interface standard PWM radio receivers and servos with CC3D-series flight controllers. Its 6-in-1 configuration consolidates power, ground, and signal lines into a single, manageable cable, reducing clutter in compact multirotor builds. The super-soft silicone insulation offers excellent flexibility and durability, resisting fatigue from vibration and repeated handling.

Each wire is distinctly color-coded per industry conventions, with the JST-SH connector pinout clearly mapped for straightforward installation. The cable supports a wide input voltage range from 4.8V to 15V, making it compatible with various LiPo battery configurations. This accessory is critical for pilots building or repairing aircraft based on the OpenPilot/ LibrePilot ecosystem.

Key Features

  • Dedicated 6-in-1 harness for CC3D, MINI CC3D, and CC3D EVO flight controllers.
  • Super-soft silicone wire sheathing for enhanced flexibility and vibration resistance.
  • Industry-standard color coding (Black: GND, Red: VCC, White/Blue/Yellow/Green/OrangeRX/Purple: PWM signals).
  • JST-SH 1.0mm pitch connectors ensure a secure, reliable connection to the flight controller.
  • Supports wide input voltage range (4.8V-15V unregulated) for compatibility with 2S-4S LiPo setups.
  • 5V-tolerant signal lines provide compatibility with a broad range of receiver and servo hardware.
  • 150mm total cable length offers optimal routing for mini and micro-sized drone frames.

Applications

  • Wiring PWM receivers to CC3D-based FPV racing or freestyle quadcopters.
  • Connecting servo outputs for gimbal control or fixed-wing aircraft using CC3D autopilots.
  • Providing clean power and signal distribution in mini and micro drone builds with CC3D flight stacks.
  • Repairing or replacing damaged wiring harnesses on existing OpenPilot/LibrePilot platforms.

Technical Specifications

Compatible Flight ControllersCC3D, MINI CC3D, CC3D EVO
Connector TypeJST-SH
Total Cable Length150 mm / 5.9 in
Wire MaterialSuper Soft Silicone
Input Voltage Range4.8V - 15V (Unregulated)
Signal Voltage Tolerance5V Tolerant
Channels Supported6 PWM (Channels 1-6, maps to outputs 7-10)
Item TypeFlight Controller Accessory / Cable

Frequently Asked Questions

Which flight controllers is this receiver cable compatible with?

This cable is specifically designed for the CC3D, MINI CC3D, and CC3D EVO flight controllers running OpenPilot or LibrePilot firmware. It uses the standard JST-SH connector pinout for these boards to provide power, ground, and six PWM signal channels.

What is the input voltage range for the power (Red) wire?

The red power wire accepts an unregulated voltage input from 4.8V to 15V. This makes it suitable for direct connection to a 2S, 3S, or 4S LiPo battery via a compatible receiver, allowing it to power the flight controller and associated servos or peripherals.

How are the colored wires mapped to the PWM channels?

The cable follows a standard color code: White is PWM signal 1 (or combined PPM), Blue is signal 2, Yellow is signal 3 (or channel 7 output), Green is signal 4 (or channel 8), OrangeRX is signal 5 (or channel 9), and Purple is signal 6 (or channel 10). Black is ground and Red is positive power.

Package Includes

  • 1 x CC3D Receiver Cable

Additional Information

Weight 0.02 kg
Dimensions 6 × 8 × 4 cm

Related Products

Image
Out of Stock

Tarot TL2961-03 Double Throw Servo Dropper 14KG

2,799.00
Learn More
Image
Out of Stock

Seagull UAV UAV #REC Camera Controller

8,282.00
Learn More
Image
Out of Stock

Arduino Uno Breakout Carrier - ASX00085

1,049.00
Learn More
Image
Out of Stock

Seagull UAV UAV #MAP2 Camera Controller

3,789.00
Learn More
Image
Out of Stock

Generic NAZE32 Receiver Cable

119.00
Learn More
Image
Out of Stock

8CH PWM PPM SBUS Signal Conversion Module

919.00
Learn More
Image
Out of Stock

RadioMaster R86 V2 Receiver

1,059.00
Learn More
Image
Out of Stock

Generic Naze 32 6DOF Receiver Cable

125.00
Learn More
Image
Out of Stock

Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (2.54 mm Dupont)

489.00
Learn More
Image
Out of Stock

RadioLink Mini Pix Flight Controller

8,499.00
Learn More
Image
Out of Stock

EFT Granule Spreading System (DC 24-80V, IP67)

35,869.00
Learn More
Image
Out of Stock

Generic Pixhawk PPM Encoder Module

689.00
Learn More