eSUN Standard LCD/DLP 3D Printer Resin - White, 1kg
eSUN Standard Resin is a versatile, white photopolymer specifically formulated for LCD/DLP 3D printers operating at 395-405nm. It offers excellent detail clarity, high hardness (Shore D 80-82), and good tensile strength, making it ideal for general-purpose prototyping and models.
Features
- Optimized for LCD/DLP 3D printers with a 395-405nm UV light source.
- Features high hardness (Shore D 80-82) and significant tensile strength (46-67 MPa) for durable prints.
- Delivers high precision and improved flow characteristics, ensuring smooth surfaces and intricate detail.
- Formulated for low odor and easy post-processing with minimal warping.
Out of stock
eSUN Standard Resin in White is a high-performance photopolymer engineered for LCD/DLP 3D printers, providing superior print quality compared to many stock resins. This general-purpose resin is compatible with most LCD and DLP printers utilizing 395-405nm LED UV light sources, offering faster printing speeds, low odor, and non-toxic properties for a safer printing environment.
This resin exhibits low viscosity, promoting excellent flow and detail resolution, while also being scratch-resistant and moisture-resistant for enhanced durability of finished prints. Achieving optimal results requires proper handling: always shake the resin well before use and avoid direct sunlight during printing. Post-processing involves cleaning finished models with high-concentration alcohol (>95%) for approximately 30 seconds to remove uncured resin.
For storage, keep the resin sealed and away from light at room temperature, ideally between 15°C and 35°C in its original container, steering clear of dusty or moist conditions. During handling, wear gloves to prevent skin contact and ensure the print area is well-ventilated. In case of accidental contact, rinse immediately with plenty of water and seek medical advice if irritation persists.
Additional Information
| Weight | 1.2 kg |
|---|---|
| Dimensions | 29 × 13 × 1 cm |
