Pro-Range PLA Filament 1.75mm 1kg Green

For optimal results with Pro-Range PLA, a printing temperature between 190°C and 220°C is recommended. Always start with the lower end and gradually increase if you observe issues like poor layer adhesion or extrusion. Fine-tuning within this range will depend on your specific printer and desired print quality.

To ensure excellent bed adhesion for Pro-Range PLA, use a heated bed typically set between 50°C and 65°C. Applying a thin layer of gluestick, blue painter's tape, or a PEI sheet to the print surface can further enhance adhesion and prevent warping. Calibrate your first layer height for optimal squish.

The PLA+ variant in this Pro-Range filament is an enhanced version of standard PLA, offering significantly improved toughness and interlayer bonding. This modification results in stronger, more durable prints less prone to breakage, making it suitable for functional parts where standard PLA might be insufficient, while remaining environmentally friendly.

While PLA is less hygroscopic than other materials, drying Pro-Range PLA filament can prevent print quality issues like stringing and bubbling. If exposed to humidity, dry the spool at 45-50°C for 4-6 hours in a filament dryer or a food dehydrator. This ensures consistent extrusion and optimal part strength.