Pro-Range PETG Sparkle Filament 1.75mm 1kg Green Sparkle

For optimal results, print at 250°C with a bed temperature of 70-80°C. A print speed of 50-100 mm/s is advised. Ensure proper bed adhesion using glue stick or PEI sheets for best first layer success. Keep your environment stable to minimize warping.

To prevent warping, ensure your print bed is clean and properly leveled. A bed temperature of 70-80°C is crucial, along with an adhesive such as glue stick or hairspray. Printing in an enclosure can help maintain a stable ambient temperature, reducing thermal stress on the print.

The embedded sparkle particles are carefully formulated to not significantly degrade the base PETG's excellent mechanical properties, such as its impact resistance and durability. Printability remains consistent with standard PETG, though slight adjustments to retraction might be needed. The visual effect is purely aesthetic.

Yes, like all PETG filaments, the Sparkle variant is hygroscopic and benefits from drying. We recommend drying at 60-65°C for 4-6 hours before printing. This helps prevent issues like stringing, bubbling, and inconsistent extrusion, ensuring a smoother print and better layer adhesion.