eSUN S200 Standard Resin Light Blue 1kg

Optimal settings vary by printer, but a good starting point for LCD mono screens is 2-3 seconds exposure time per layer at 0.05mm layer height. For color screens, exposure might range from 6-10 seconds. Always perform a calibration test print to fine-tune for your specific machine and ambient conditions, ensuring proper bed adhesion and detail fidelity.

After printing, thoroughly wash models in 95%+ IPA or specialized resin cleaner for 1-2 minutes to remove uncured resin. Use an ultrasonic cleaner for best results. Then, dry the part completely before post-curing under a 405nm UV light for 2-5 minutes per side, or until the surface is no longer tacky and parts achieve their final hardness.

Store eSUN S200 resin in its original opaque bottle in a cool, dry, and dark place away from direct sunlight and heat sources. Ensure the bottle cap is tightly sealed to prevent light exposure and air contamination, which can degrade the resin over time. Avoid extreme temperature fluctuations to maintain shelf life and print quality.

Yes, eSUN S200 Standard Resin is broadly compatible with most 405nm UV LCD and DLP resin 3D printers. Its formulation is designed to work effectively with both monochrome and RGB color screen printers. However, specific exposure times and lift speeds may need to be adjusted based on your printer's light source power and screen type to achieve optimal print quality.