eSUN PLA+ RGB Green 1.75mm Filament 1kg

For eSUN PLA+, generally set your nozzle temperature between 205-225°C. The heated bed should be maintained at 50-70°C to ensure optimal adhesion and prevent warping. Adjust these settings slightly based on your specific printer and ambient conditions to achieve the best layer bonding and surface finish for your prints.

To enhance bed adhesion for eSUN PLA+, ensure your print surface is clean and level. Using a thin layer of PVA glue stick, painter's tape, or a PEI sheet is highly effective. Maintain a bed temperature of 50-70°C. A slower first layer print speed and proper Z-offset calibration also significantly improve adhesion.

Like most filaments, eSUN PLA+ should be stored in a cool, dry place away from direct sunlight and humidity. Utilizing a vacuum-sealed bag with desiccant, as it comes packaged, helps prevent moisture absorption. This practice ensures consistent print quality, reduces stringing, and maintains the material's mechanical properties over time.

eSUN PLA+ offers significantly enhanced toughness and impact resistance compared to standard PLA, making prints more durable and less brittle. It also boasts improved layer adhesion and a smoother surface finish, while retaining the easy printability and low warping characteristics of conventional PLA. This upgrade provides stronger, more reliable functional parts.