Generic A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

This motor is best paired with a SimonK or BLHeli-compatible ESC rated for at least 20-30A continuous current on 2S-3S LiPo. A 30A ESC, as suggested in the documentation, provides ample headroom for the motor's 16A maximum continuous rating, ensuring reliable operation and protecting against current spikes.

Yes, this is a bi-directional brushless motor. You can configure it for either clockwise (CW) or counter-clockwise (CCW) rotation by swapping any two of the three motor leads connected to the Electronic Speed Controller (ESC). No physical modification or specific motor version is required.

For optimal performance on a 3S LiPo (11.1V), 9x4.5 or 10x4.5 propeller sets are commonly used. The 1400KV rating generates sufficient RPM for these larger, efficiency-focused props, making it ideal for aerial photography and long-endurance flight platforms rather than high-speed FPV racing.

The motor features a 3.17mm (1/8 inch) output shaft. The included propeller adapter allows you to securely mount standard propellers with a corresponding bore size. Use the provided screws with the X-type motor holder to attach the motor firmly to your drone's frame arms.